Votos - , Puntuación media:
(
)
)
Fabricar: Lenoxx Electronics
Tamaño del archivo: 104.81 kb
Nombre del archivo: d9e9e582-092a-4620-9146-e2e4f4a09c45.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightening storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 14. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus. 1 IB-CR777(NL)-WM-E-020504 ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources -The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting -The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry -Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing -The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 5. Do not connect FM antenna wire to any outdoor antenna. LOCATION OF CONTROLS FRONT VIEW ALARM SET SWITCH ALARM 1 TUNING (1, 2 or 1+2) INDICATOR CLOCK DISPLAY DIAL SCALE CONTROL ALARM 2 INDICATOR DIMMER PM INDICATOR VOLUME SWITCH CONTROL TOP VIEW FUNCTION SWITCH SNOOZE BAND (BUZZ/AUTO/OFF/ON) BUTTON SWITCH TIME SETBUTTON FORWARD SLEEP BUTTON ALARM/SLEEP BUTTON OFF BUTTON REVERSE ALARM BUTTON BUTTON 2 IB-CR777(NL)-WM-E-020504 LOCATION OF CONTROLS BACK VIEW BATTERY COMPARTMENT (9V, for back up) FM ANTENNA WIRE (unwind for best reception) AC POWER CORD OPERATING INSTRUCTIONS Powering Up Plug the AC power cord into a 120V, 60Hz electrical outlet. The clock display will light up and flash indicating the power is on. NOTE: This cord is polarized. This means the cord will only fit one way into the socket or wall outlet. If it does not fit, do not force it, just reverse it and try again. BATTERY BACK-UP If the AC cord is disconnected or if there is a short time power failure, this electronic clock and timer are designed to continue operating internally (without showing the time in the display) if a 9 volt battery (not included) is installed. The radio will work fine without this backup battery. NOTE: You may check the condition of the battery every few months by disconnecting the AC cord and connecting it again 2 or 3 minutes later. The preset times will show. If the time flashes, it indicates the battery is dead or not connected properly. Setting the Clock 1. Press and hold the TIME set button together with the FORWARD button until the display shows the desired hour. 2. Press and hold the TIME set button together with the REVERSE button until the display shows the desired minutes. NOTE: When the PM indicator is off, the time is AM. 3 OPERATING INSTRUCTIONS Setting the Alarm Times This set has dual alarms. You may set ALARM 1 to wake you at a certain time, or ALARM 2 to wake you at a different time, or ALARM 1+2 -both...