Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
. To obtain the best FM reception, extend and change the direction of the AC power cord. AM: A sensitive ferrite core antenna is built in this unit to assure excellent AM reception in most areas. To improve the reception of weak stations, turn the unit in the direction which gives the best results. Listening to Tapes Before use, press the off/time set button to turn off the radio. Set alarm 1 select button to off position. 1 Press the stop/eject button to open the cassette compartment cover. 2 Insert the cassette tape. 3 Press the play button to begin tape playback. 4 Adjust the volume control to the desired level. To stop playback, press the stop/ eject button. only. 14 Fast forward and rewind This unit allows the tape to fast forward or rewind by simply pressing the fast forward or rewind button. <*4 new pp*> FF <+* ft£W FF ir= Pause button- »PAUSE y Full auto-stop- When the tape reaches its end during playback, fast forward or rewind, the automatic stop system will release the operation buttons. To fast forward the tape, press the fast toward button. To rewind the tape, press the rewind button. The pause button can be used to temporarily stop the tape from moving during playback. Do not use the pause button to stop the tape for a long period of time. This may cause damage to the tape. 15 Concerning Cassette Tapes Cassette tapes exceeding 90 minutes These tapes are handy for their long playback time but be careful about repeatedly stopping and starting, rewinding and fast forwarding these tapes in short intervals as they are thin, tend to stretch and may become entangled in the machine. OK If the tape loosens take up the slack b turning the reel in t proper direction. NO Do not handle, or pull the tape out of the cassette. Use normal types of cassette tapes onty. If other tapes are used, you may not obtain optimum performance. Cassette tapes, both recorded and unrecorded, should not be stored in locations with high temperature, high humidity or direct sunlight. Never place a recorded cassette near a/magnetiq source, such as a magn^J or a TV set as this may affect tape performance. Operation for Dual Wake-Up System This set incorporates a dual wake-up sys- any desired wake-up time in the following tem, you can set each alarm time to way. Alarm time setting 1 Press and hold the alarm 1 (or 2) display/adjust button. The dock display shows “! 5 . 00 ”• White pressing the alarm 1 (or 2) display/adjust button, press and hold time set buttons until desired wake-up time appears on the clock display. Make sure the AM or PM setting is correct. Release the alarm 1 (or 2) display/adjust button, and the present time is restored on the clock display. To make sure of the preset time, press the alarm 1 (or 2) display/adjust button again. Operation for Dual Wake-Up System (continued) Radio alarm (ALARM 1) 1 2 3 Press the alarm 1 select button. The alarm 1 indicator will light up. Set the desired wake-up time on alarm 1. (See page 17.) Tune in the desired broadcasting station. (See page 12.) 4 Press the off/time set button. At the set wake-up time, the radio alarm will activate. The alarm will shut off automatically in about 59 minutes. To shut off the alarm before automatic shut-off, press the off/time set button. IB Tape alarm (ALARM 1) 1 2 Press the alarm 1 select button. The alarm 1 indicator will tight up. Set the desired wake-up time on alarm 1. (See page 17.) O Insert the cassette tape. (See page 14.) 4 Press the play button. At the set wake-up time, the tape 8larm will activate. •To shut off the tape alarm, press the stop/eject button. The tape play stops and the radio alarm will continue automatically. •The alarm will shut off automatically in 59 minutes. When the tape reaches the end during playback, the automatic stop system will release the playback button and the radio alarm will continue automatically. •To shut off the alarm before automatic shut-off, press the off/time set button. 12 Operation for Dual Wake-up System (continued) Buzzer alarm (ALARM 2) 1 Press the alarm 2 select but* ton. The alarm 2 indicator will light up. 2 Set the desired wake-up time on alarm 2. (See page 17.) At the set wake-up time, the buzzer alarm will activate. The alarm will shut off automatically in about 59 minutes. To shut off the alarm before automatic shut-off, press the off/time set button. 2Q Combination of the alarm 1 and the alarm 2 The buzzer alarm and the radio (or tape Combination of the alarm 1 and the alarm alarm) are set at the same time. Both 2 permits the following convenience, alarms will activate simultaneously. Example Set the wake up time for weekday on the alarm 2, and for weekend on the alarm 1. Wake-up time for Wake-up time for weekday weekend ALARM 1...0FF ALARM 2...BUZZER Note: • The alarm will activate automatically at the same time every day. • Make sure to set the alarm select button to ‘OFF" when you want ...