Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
3 Connect the AC power adaptor to the power supply. Note . To use the build- in batter y as power supply, make sure that >!#?! ! > charge your digital radio. Turn on Adjust volume Press / repeatedly. : Increase the volume. : Decrease the volume. Connect the earphones . Before tuning to a radio station, connect the supplied earphones to the socket on the top of the product. . For optimal reception, fully ex tend the cable of your earphones and adjust the position of your digital radio. Note To avoid inter ference, position your digital radio as far as possible from T V, VCR , or any other radiation source. Listen to DAB radio Switch to DAB mode Press DAB/ FM repeatedly until [DAB Mode] ( DAB mode) is displayed. Store DAB radio stations automatically @ > HJK ! or no DAB station is stored, the digital radio automatically stores DAB radio stations. 1 Press DAB/ FM repeatedly to switch to DAB mode. » The scan star ts. A number on the middle right: indicates the total number of stations that has been stored. 2 The scan is complete. » ?! automatically. » If no DAB station is stored, [No DAB Station] (no DAB station) is displayed. Re-scan DAB radio stations To keep the list of DAB stations up- to- date, per form full scan regularly. 1 Press MENU to access the DAB menu. 2 Press / repeatedly until [ Full scan] ( full scan) is displayed. 3 Press OK # » The scan goes on until all available DAB radio stations are # Store DAB radio stations manually Note 4 Press OK . 5 Repeat steps 1 to 4 to store more DAB stations. Note To over write a preset station, store another station with its sequence number. Select a preset DAB radio station 1 Press PRESET. » [Preset Recall] (recall the list of preset stations) is displayed. 2 Press / repeatedly to select a preset DAB radio station. 3 Press OK # Note . If no button is pressed within 15 seconds when you scroll through the preset station list, the radio tunes to last selected station. Dynamic Label Segment ( DLS) Signal streng th Program Type (PT Y) Ensemble name Channel and frequency Signal error rate Bit rate and audio status Time Use DAB menu 1 Press MENU to access the DAB menu. » [Station list] (station list) is displayed. 2 Press / repeatedly to select a menu item. 3 Press OK . 4 Repeat steps 2 and 3 if sub- options are available. . [Station list] ( station list) : display the list of all stored DAB radio stations. . [ Full scan] ( full scan) : scan all available DAB radio stations. . [ Manual tune] Q&X channel/ frequency manually and add it to the station list. . [DRC] ( DRC) : Dynamic range compression adds or removes a degree of compensation for the Note H= > > ! station. . [Station order] ( station order) : select an ordering pattern for the list of stored stations. . [Alphanumeric] ( alphanumeric) : list stations in alphanumeric order. . [Ensemble] ( ensemble) : list groups of stations that are broadcast together on the same ensemble. . [System] ( system) : adjust system settings. . [Backlight] ( backlight): select [On] to keep the backlight on, or select a duration for the backlight. . [Language] ( language) : select a language for displayed menus. . [Factory Reset] ( factor y reset): reset all settings to factor y default. . [Software Upgrade] ( sof tware upgrade) : upgrade the sof tware when available. . [SW version] ( sof tware version) : display the version information of current sof tware. Note Before you per form the sof tware upgrade, make sure that the Listen to FM radio Switch to FM mode Press DAB/ FM repeatedly until [ FM Mode] ( FM mode) is displayed. Tune to a radio station manually Press / repeatedly until the target frequency is displayed. Tune to a radio station automatically Press OK, or press and hold » [Scanning] (scanning) is displayed until a station with strong signals / for more than two seconds. is detected and broadcast. Store FM radio stations Note 3 Press / repeatedly to select a sequence number. 4 Press OK # » The frequency of the preset radio station is displayed behind the sequence number. 5 Repeat steps 1- 4 to store more FM stations. Tip To over write a preset station, store another station with its sequence number. Select a preset FM radio station 1 Press PRESET. » [Preset Recall] (recall the list of preset stations) is displayed. 2 Press / repeatedly to select a preset FM radio station. 3 Press OK # Note If no button is pressed within 15 seconds when you scroll Display RDS information Radio Data System ( RDS) is a ser vice that allows FM stations to transmit additional information. When you tune to an FM radio station that transmits RDS signals, the station name is displayed. 1 Tune to an RDS station. 2 Press INFO repeatedly to scroll through the following information (if available): . Radio tex t . Program type such as [NEWS] ( news) , [SPORT] (spor t) , [POP M] ( pop music). . . . Station name . Mono/ stereo Use FM menu 1 P...