Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Dream Machine jest znakiem towarowym Sony Corporation. Znaeka Dream Machine je ochranni znamka Sony Corporation A Dream Machine a Sony Corporation bejegyzett vedjegye. To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Before You Begin Thank you for choosing the Sony Dream Machine. This clock radio will give you many hours of reliable service and listening pleasure. Before operating the Dream Machine, please read these instructions thoroughly and retain them for future reference. These instructions cover these models: ICF-C233 and ICF-C233L. Their differences are shown below. Model Number ICF-C233 ICF-C233L Band FM/AM FM/MW/LW Features • Dual alarm FM/AM (ICF-C233) or FM/MW/LW (ICF-C233L) PLL (phase locked loop) synthesized clock radio • 5 random memory presets • Radio and buzzer alarms with the snooze function • LCD display with backlight Setting the Clock 1. Plug in the unit. The display will flash “AM 12:00” or “0:00”. 2. While holding down CLOCK/ENTER, press TIME SET/TUNE + or –. Use the + button to advance the hour and minute digits and the – button to reverse them. Hold down the + or – button to advance or reverse the time setting at high speed. 3. Release CLOCK/ENTER . The time is set and clock operation begins. • The clock system varies depending on the model you own. 12-hour system: “AM 12:00” = midnight 24-hour system: “0:00” = midnight • For zero second adjustment, release CLOCK/ ENTER at the sound of a time tone. • The colon (“:”) in the time indication is flashing when the radio is off and steadily displayed when it is on. Operating the Radio Manual Tuning 1. Press SLEEP/RADIO ON to turn on the radio. The band and frequency and the preset number displayed before the radio was last turned off appear on the display for 10 seconds, after which the current time indication returns to the display. 2. Turn the VOL (volume) control to make sure the sound is audible. 3. Press BAND to select the band. The most recently tuned FM, AM (MW) or LW frequencies alternate on the display with each press of the button. 4. Use TIME SET/TUNE + or – to tune in the desired station. The FM channel step is set to 0.1 MHz and the AM channel step is set to l0 kHz for the model for the North America. The FM channel step is set to 0.05 MHz and the AM(MW) channel step is set to 9 kHz for the model for other countries. (The FM frequency indication changes every 0.1 MHz.) The LW channel step is set to 9 kHz . A beep sounds and the tuning stops when the upper or lower extremity of the band range is reached. 5. Set the desired volume with the VOL control. • To turn off the radio, press ALARM RESET/ RADIO OFF. • To improve reception FM: Extend the FM wire antenna fully to increase Preset Tuning You can preset up to five stations for one-touch tuning, one under each of preset buttons 1 to 5. Presetting a station Example: To set AM 1260 kHz in preset button 2. 1. Tune in the station you want to preset. (See “Manual Tuning”) 2. Press CLOCK/ENTER. “P” flashes in the display for about 10 seconds. 3. Press the preset button under which you wish to store the station before the “P” indication stops flashing. Two beeps sound to indicate successful presetting. • The current time indication replaces the band and frequency indication on the display 10 seconds after a station is preset, but the preset number remains in the display. • When using the radio alarm, preset the station you wish to serve as the alarm (the wake-up frequency) under preset button 1. To change a preset station Press the preset number again after tuning manually to a different station. The previous station is replaced by the new one. Tuning in a preset station 1. Press SLEEP/RADIO ON to turn on the radio. 2. Press the preset button under which the desired station is stored. The band, frequency and preset number replace the current time indication in the display for about 10 seconds. • To check the current station, press the preset number button. The band and frequency are displayed for 10 seconds. Setting the Alarm You can set the radio and buzzer alarms at the preset time. Before setting the alarm, be sure to set the clock (See “Setting the Clock”). 1. Turn off the radio. 2. While holding down ALARM or ALARM, press either TIME SET/ TUNE + or – until the desired time appears in the display. At this time, the or indication appears in the display. 3. Release ALARM or ALARM. 4. Press ALARM MODE until the alarm you want appears in the display. Each time you press ALARM MODE, the alarm indication changes as follows. When the alarm time is reached, the radio or buzzer sounds for 60 minutes or until turned off. To stop the alarm Press ALARM RESET/RADIO OFF while the alarm is activated. The alarm will function at the same time the next day. To cancel the alarm Press ALARM MODE until neither the nor indication is displayed. Notes • The alarm does not function...
Otros modelos de este manual:Los receptores de radio - ICF-C233 (226.89 kb)
Los receptores de radio - ICF-C233L (226.89 kb)