Iniciar sesión:
Votos - 5, Puntuación media: 3.8 ( )

Manual de usuario Hasbro, modelo Alarm Clock Micro Music Player

Fabricar: Hasbro
Tamaño del archivo: 139.69 kb
Nombre del archivo: Hitclips_Alarm_Clock_Micro_Music_Player.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


2. Insert 4 new AAA batteries. 3. Replace battery door and tighten screw. To ensure proper function - Do not mix old and new batteries. - Do not mix alkaline, standard (carbon zinc), or rechargeable batteries (nickel-cadmium). - Battery installation should be done by an adult. - Non-rechargeable batteries are not to be recharged. - Rechargeable batteries are to be removed from the toy before being recharged (if removable). - Rechargeable batteries are only to be charged under adult supervision (if removable). - Only batteries of the same or equivalent type as recommended are to be used. - Batteries are to be inserted with correct polarity. (see engraving on back of alarm) - Exhausted batteries are to be removed from the toy. - The supply terminals are not to be short-circuited. 1. Slide the mode switch, located on the right hand side of the clock, to the SET TIME position. 2. Press the hour button, on the front of the clock, until the correct hour appears on the screen. 3. Press the minute button, on the front of the clock, until the correct minute appears on the screen. 4. Return the mode switch to the TIME position after you have finished. 1. Remove the clip and string from the HitClip Single. 2. Slide HitClip Single into Alarm Clock. 3. Press the RELEASE button at the top of the clock to the down position and rotate the blue wheel until the clip you would like to listen to is at the top. Note: Do not rotate if button is up, damage will occur! 4. Press the RELEASE button again, so that it is in the up position and the HitClip is secured. 5. Press the PLAY button to start and stop music. 1. Slide the mode switch, located on the right hand side of the clock, to the SET ALARM position. 2. Press the hour button, on the front of the clock, until the desired hour appears on the screen. 3. Press the minute button, on the front of the clock, until the desired minute appears on the screen. 4. Return the mode switch to the TIME position after you have finished. 5. To activate the alarm, slide the mode selector on the front of the alarm to the HitClip alarm position to awaken to your favorite HitClip, or to the buzz position to awaken to a buzzing alarm. Note: Please make sure that you follow all instructions below within “Playing a HitClip” in order to wake to a HitClip Single. 6. When the alarm goes off, you can press the SNOOZE button to reset the alarm for 4 minutes. Note: The SNOOZE button will not operate, if you are using a Yahoo! HitClips Downloader Recordable Chip. 7. To deactivate the alarm, slide the mode selector on the front of the alarm to the ALARM OFF position. 8. Press the LIGHT button to view the clock when dark. Ages 5 & Up Item No. 02008 Alarm Clock Micro Music Player Instruction 90-Day Limited Warranty C StatemFCC Statement 90-Day Limited W90-Day Limited Warranty C StatemFCC Statement Tiger Electronics, Ltd. (Tiger) warrants to the original consumer purchaser of this product that the product will be free from defects in materials or workmanship for 90 days from the date of original purchase. This warranty does not cover damages resulting from accident, negligence, improper service or use or other causes not arising out of defects in materials or workmanship. During this 90-day warranty period, the product will either be repaired or replaced (at Tiger's option) without charge to the purchaser, when returned with proof of the date of purchase to either the dealer or to Tiger. Product returned to Tiger without proof of the date of purchase or after the 90-day warranty period has expired, but prior to one year from the original date of purchase, will be repaired or replaced (at Tiger's option) for a service fee of U.S. $8.50. Payments must be by check or money order payable to Tiger Electronics, Ltd. The foregoing states the purchaser's sole and exclusive remedy for any breach of warranty with respect to the product. All product returned must be shipped prepaid and insured for loss or damage to: Tiger Repair Department 1000 N. Butterfield Road, Unit 1023 Vernon Hills, IL 60061, U.S.A. The product should be carefully packed in the original box or other packing materials sufficient to avoid damage during shipment. Include a complete written description of the defect, a check if product is beyond the 90-day warranty period, and your printed name, address and telephone number. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) DAY PERIOD DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS PRODUCT. Some states do not allow limitations as to how long an implied warranty lasts and/or exclusions or limitations of incidental or consequential damag...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría