Votos - 7, Puntuación media: 3.9
(
)
)
|
Resumen del manual
Prefer servicing to qualified service personnel. • Dangerous voltage: Uninsulated dangerous voltage, that may be of sufficient magnitude to constitute a risk of electrical shock to persons, is present within this product enclosure. • Attention: The owner's manual contains important operating and maintenance instructions for your safety, it is necessary to refer the manual. Power supply_ AС operation • The appliance is for household use only. • Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home. • Insert the plug into the power supply. • The set is now working as an electronic clock. 2 Battery backup • Insert 1x9 V battery (not included) to the terminal inside the battery compartment. Your set will not work normally from the battery supply, but there is now the advantage that, in case there is a mains current failure, your clock will continue to work. The clock display will not light up, the clock time will be held in the clock memory by the battery back-up system. This enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant to be used from short temporary power failures. For longer durations the battery may become exhausted or there may be some deviation in accuracy. • When the battery is exhausted, it should be removed from the set to prevent leakage. If you do not wish to take advantage of the battery back-up system, your set will work normally without a battery. However, if disconnected from the mains, the clock figures will flash when the mains are re-connected and you must re-set the clock as described in the AC Operation paragraph. Setting the clock_ To set time • Slide the ON/OFF/AUTO/ALARM switch to "OFF" position. • Press and hold the TIME button. • Press HOUR button and MIN button respectively to set hour and minute. The time will be showed on the display. Radio operations_ Tuner operations • Slide the ON/OFF/AUTO/ALARM switch to "ON" position. • Slide the BAND switch to FM or AM position to select FM or AM band. • Adjust TUNING knob for the desired radio station. • Slide the ON/OFF/AUTO/ALARM switch to "OFF" position to turn the radio off. Volume level • Adjust the volume with VOLUME regulator for the desired listening level. Sleep to music The radio can be set to play and to switch off automatically after desired time. • Slide the ON/OFF/AUTO/ALARM switch to "OFF" or "AUTO" or "ALARM" position and adjust the volume with VOLUME regulator. • Press the SLEEP button and MIN button simultaneously. Release it when the desired time is reached. • Press the SLEEP button and HOUR button simultaneously. Release it when the desired time is reached). • The radio will be turned off automatically after the set time. • When the radio in sleep operation is playing, press SNOOZE button to turn off the radio. Antenna • For AM reception, this radio incorporates a highly sensitive ferrite core bar antenna. • For FM reception, this set is specially equipped with an external wire as FM antenna. Be sure to untwist it to its fullest length for peak performance. 3 Alarm operations Alarm setting • Press and hold ALARM button. • At this time press HOUR button and MIN button respectively to set alarm time. • Then release ALARM button to return to the normal time display. • Press the ALARM button to show the alarm time. Alarm function setting • Slide ON/OFF/AUTO/ALARM switch to "AUTO" to select the alarm signal - the radio, or "BUZZ" to select the alarm signal - the buzzer. When the alarm function is on, the AUTO indicator will light on. When the time is the same as the alarm time, the buzz or radio sound will be heard. It will turn off in 59 minutes automatically. • Press the ALARM button to stop the alarm. • The alarm will start again at the same time next day. To turn it off slide the ON/OFF/AUTO/ALARM switch to "OFF" position. Snooze control • If press SNOOZE button when the alarm sound is on, the sound will stop temporarily, after 9 minutes, the alarm sound continue to sound. Maintenance and care • Switch off the appliance, unplug from the power supply. • The outside of the appliance can be cleaned with a slightly damp cloth. • Avoid leaving the clock radio in direct sunlight or in hot, humid, dusty places. Keep the set away from heating appliances and appliances that generate noise, such as fluorescent lamps and motors. Specification_ Power supply 220 V, 50 Hz Stabilizer Quartz Display 0.6" LED Net / Gross weight 0.35 kg / 0.4 kg Gift box dimension (L x W x H) 138 x 52 x 138 mm Radio frequency FM 64-108 MHz AM 530-1600 KHz RMS 300 mW Specifications are subject to change without notice. Mass and dimension are approximate. 4 Описание 1. FM антенна 2. Переключатель ON/OFF/AUTO/ALARM 3. Индикатор будильника 4. Дисплей 5. Регулятор TUNING 6. Переключатель BAND 7. Регулятор VOLUME 8. Кнопка MIN ...