Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
2. Press the Wake-to Button to select iPod, Radio or Buzzer alarm source. You can set different alarm sources for each alarm. 3. Press the Alarm Button again or wait for 10 seconds. Alarm is now armed, indicated by the numbered alarm clock icon. Review, Arming and Disarming Alarm (Turn Alarm Function On and Off) 1. Press Alarm 1 (or Alarm 2) Button once. The unit will show the alarm time on the bottom part of the display for alarm time review. 2. During alarm review, press the Alarm 1 or Alarm 2 button again to arm or disarm the alarm. When the alarm is armed, the related alarm icon appears in display. Resetting the Alarm to Come on the Next Day 1. When the alarm is sounding, press the Alarm Reset/Power On/Off Button to stop the alarm and reset it to come on the following day at the same time. Snooze 1. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again 9 minutes later. Snooze can be press several times during the 1 hour alarm cycle. Sure Alarm The iH12 has a sure alarm feature. If backup batteries are installed (see page 3) the buzzer alarm will still sound in the event of a power failure. 6 Using the Alarms Note: Please make sure you are using the correct insert for your iPod (see Install iPod Insert) and that it is properly docked into the iH12. Failure to do so may damage your iPod. 1. While your iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Note that non-docking iPods will NOT charge. Charging your iPod During normal operation, press the Snooze/Dimmer Button to control the brightness of the LCD display. 1. Dock the already playing iPod. The iH12 will automatically turn on and you will hear the music playing from your iPod. Note: If the playing song/music loudness is too low on the iPod itself, iH12 may not detect iPod is in play mode. Press the Play/Pause Button on main unit or remote control twice to play it. 2. When the iPod is docked and in standby mode, press the Play/Pause Button on the iH12 or on the remote control to play it. The iPod Icon will appear on the display, showing iPod playing mode. 3. Press the iPod Play/Pause Button again to pause play; press again to resume it. 4. Press the Volume+ and Volume– Button on the iH12 or on the remote control to adjust the system volume. 5. Press >> or << Button on the iH12 or on the remote control to go to the next or previous track. Press and hold while track is playing for high speed forward or reverse music search of the current track. 6. To turn off the unit, press the Alarm Reset/Power On/Off Button on the iH12 or on the remote control to turn it off. Your iPod will continue charging while in the dock. 7 Listening to iPod If you are using an iPod without a docking port or other MP3 player or portable audio device, you can play it through the iH12 via the Line-in Jack. 1. Plug one end of an audio patch cord (available at into the headphone or line-out jack on your device and the other end of the patch cord into the iH12 Line-in Jack, located on the back of the unit. 2. Press the Radio/Aux Button on the iH12 or on the remote until the Line-in Icon appears on the right hand lower corner of the display, indicating Line-in playing mode. 3. Turn on and play your device. 4. Press the Volume+ and Volume– Button on the iH12 or on the remote control to adjust the system volume. You may need to adjust your device volume, too. 5. To turn off the unit, press the Alarm Reset/Power On/Off Button on main unit or remote control to turn it off. Please remember to turn off your device, too. Listening to non-docking iPod or other portable audio devices Dimmer Operation Setting up Antenna 1. Plug the AM antenna cable into the AM Loop Antenna Socket on the back of unit. Move antenna 12” away from unit for best reception. 2. Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas. Tuning and Playing the Radio 1. Press the Radio Button to select radio play mode. Press as needed to select AM, FM1 or FM2 radio band. 2. Press << or >> Button to tune radio to a desired station. 3. To memorize the current station as a preset, press and hold Preset Button 1, 2, 3 or 4. Repeat step 1-3 to preset up to 12 stations (4 AM and 8 FM). To listen to a preset station at any time, simply press the desired preset button. 4. Press the Volume+ and Volume– Button on the iH12 or on the remote control to adjust the system volume. 5. To turn off the unit, press the Alarm Reset/Power On/Off Button on the iH12 or on the remote control to turn it off. During normal operation, press and hold the Wake-to Button to set button click sound on or off. After the display shows “CLC”, press << or >> Button to set click sound on or off, then wait around 5 seconds to exit the setting mode. 8 Listening to Radio Sleep mode lets you sleep to your iPod or the radio, gradually lowering the volume until the unit shuts off at the selected time. 1. Pres...
Otros modelos de este manual:Los receptores de radio - iH12 (295.21 kb)