ESSENTIAL INSTRUCTIONS READ THIS PAGE BEFORE PROCEEDING! Your purchase from Rosemount Analytical, Inc. has resulted in one of the finest instruments available for your particular application. These instruments have been designed, and tested to meet many national and international standards. Experience indicates that its performance is directly related to the quality of the installation and knowledge of the user in operating and maintaining the instrument. To ensure their continued operation to t

b. Connect the four wires from the core processor to the appropriate terminals on the transmitter. See Table 3 and Figure 13 (standard core processor) or Figure 14 (enhanced core processor). No bare wires should remain exposed. Do not ground the shield or drain wire(s) at the transmitter. Table 3. Transmitter terminals for 4-wire cable Terminal Wire color(1) Function 13 Red VDC+ 14 Black VDC– 15 White RS-485A 16 Green RS-485B (1) Wire colors apply only to 4-wire cable supplied by Micro Motion. 1

For information on I.S. applications, refer to Micro Motion approval documentation. For complete instructions about configuration, maintenance, and service, refer to the instruction manual shipped with the transmitter. WARNING Improper installation in a hazardous area can cause an explosion. For information about hazardous applications, refer to Micro Motion approval documentation, shipped with the transmitter or available from the Micro Motion web site. WARNING Hazardous voltage can cause sever

1. Conecte un extremo del Cable de Conexion (incluido) en el audifono o el enchufe de salida de su MP3 y el otro extremo del Cable de Conexion en el enchufe Aux del iSoundSpa, ubicado al respaldo de la unidad (Fig. 5). 2. Oprima el BOTON POWER (encendido) del iSoundSpa para encenderlo (Fig. 1). 3. Alterne con el BOTON AUDIO en la unidad hasta alcanzar el modo auxiliar (Fig. 1). El ICONO AUX aparece el la pantalla LCD en la esquina a la derecha abajo, para indicar que el modo auxiliar ha sido sel

3). 3. Para cambiar el angulo de vision de la hora y temperatura que aparece en la pared o el cielorraso, gire la PERILLA DE ROTACION DE LA HORA hasta lograr el resultado deseado (Fig. 3). ATENCION: La PERILLA DE ROTACION DE LA HORA gira hasta 350 grados. 4. Para enfocar la hora y la temperatura en la pared el cielorraso, gire la perilla del enfoque (FOCUS KNOB) (Fig. 3) hasta lograr el resultado deseado. 23 Uso de la Temperatura Interior La unidad empieza a leer la temperatura al interior cuand

8 Escucha del radio 1. Oprima el boton RADIO (Fig. 1). 2. Use el interruptor AM/FM ubicado en el respaldo de la unidad (Fig. 3) para cambiar de banda. 3. Gire el TUNER (sintonia) (Fig. 1) para seleccionar la radioemisora. 4. Para ajustar el volumen, gire la perilla VOLUME (volumen) (Fig. 1) al nivel deseado. 5. Una vez terminado de escuchar el radio usted puede apagarlo presionando el boton POWER (energia). (Fig. 1) ATENCION: Ajuste la antena en el respaldo de la unidad para mejorar la recepcion

2. Oprima repetidamente el boton TIMER (Fig. 4) hasta iluminar el LED correspondiente cerca del tiempo que desea seleccionar, 15, 30 o 60 minutos. Ajuste y uso de la alarma 1. Oprima el boton AL SET (Fig. 4). La hora empezara a destellar. 2. Con la hora destellando, oprima el boton HOUR (hora) (Fig. 4) hasta alcanzar la hora correcta. Luego oprima el boton MIN (minutos) (Fig. 4) hasta alcanzar los minutos correctos. 3. Despues de 5 segundos la hora seleccionada para la alarma dejara de destellar

The transmitter requires 24 VDC. The sensor provides an accurate and predictable four-wire, 4-20 mA output signal for temperature and a second 4-20 mA output signal for humidity. Dimensions FRONT 0.95" (241mm) 2.25" (572mm) 2.75" (699mm) 0.75" (191mm) VIEW SIDE VIEW 4.5" (1143mm) Wall TOP VIEW Specifications Output 4 to 20 mA Sensor 10K . platinum RTD Supply Voltage 24 VDC Tolerance of Resistance (Accuracy) ±1.5°F (±0.83°C) ±2% RH (from 15 to 95% RH) Response Time 20 seconds for a 63% step Envir

Connecting this unit to other power sources may damage the unit. This unit has a polarized AC plug with one wide blade and one narrow blade.This plug will only fit into a matching polarized AC outlet. This is a safety feature to reduce the possibility of electric shock. If this plug will not fit in your AC outlet, you probably have an outdated non-polarized outlet. You should have your outdated outlet changed by a qualified, licensed electrician. Do not file the wide blade on the plug, or use a

3 Electrical power source..................................................................3 Product registration ........................................................................4 For your records ...............................................................................4 Important battery precautions ...................................................4 Precautions for the player .............................................................4 IMPORTANT SAFETY INSTRUCTIONS ...........