Votos - 1, Puntuación media: 3 ( )

Fabricar: Bell Sports Tamaño del archivo: 4.74 mb Nombre del archivo: 2757_manual.pdf Idioma del manual:

1. Press ‘Menu’ 2. Press ‘Up’ or ‘Down’ until ‘3. Settings’ is selected, then press ‘Select’. 15 3. Press ‘Up’ or ‘Down’ until ‘4. System Configuration’ is selected, then press ‘Select’. 4. Press ‘Select’ on ‘1: Network Setting’, and use ‘Up’ or ‘Down’ to change network setting to ‘DHCP’, then press ‘Save’. 5. Please refer to Section 2.5 for SIP server setup information. 6. If you only need to change the network settings, but don’t need to change the SIP server information (i.e. this is not an initial setup), you must save the new network settings and reboot the 2757. To save the new network settings, press ‘Up’ or ‘Down’ until ’20. Commit Changes’ is selected, then press ‘Select’. When ’Changes saved’ is displayed on the LCD screen, all the settings are saved. 16 7. To reboot the 2757, press ‘Down’ to move to ’21. Reboot System’, and press ‘Select’. ‘Rebooting’ will appear on the LCD screen. After the reboot is completed, the 2757 is ready for use. 2.4 Network Setup (Web Configuration) You can also configure the network by using a web browser. In order to do this, you must first know the IP address of the 2757. If you are using PPPoE or DHCP, please follow the instructions below to get the IP address. 2.4.1 Display IP Address 1. Press ‘Menu’ 2. Press ‘Up’ or ‘Down’ until ‘3. Settings’ is selected, then press ‘Select’. 17 3. Press ‘Up’ or ‘Down’ until ‘5. Model Information’ is selected, then press ‘Select’. 4. Press ‘Up’ or ‘Down’ until ‘4. IP Address is highlighted. Make a note of the IP address, and then press ‘Exit’ three times to return to the main menu. 2.4.2 Web Interface Network Configuration 1. Use a web browser to connect to the IP address of the IP Phone. For example, if the IP Phone’s IP address is 192.168.4.50, type ‘in the browser’s address bar. A login window will then appear. The default username is ‘admin’, and the password is blank (do not put anything in password field). 18 2. After you have logged in, you will see a summary of the current network settings. To make changes or enter additional information, click ‘Network’ on the left. 3. On this screen, you can choose the connection mode (static IP, PPPoE, or DHCP), enter the IP address in static IP mode, and enter PPPoE username and password. You can also enable the VLAN function. After entering the desired settings, you must click ‘Submit’ at the bottom of the web page. To discard the settings, click ‘ Cancel’. 19 4. Now click ‘Management’ on the left. Then click the ‘Configuration Commit / Reset’ tab. Press ‘COMMIT…’. When the ‘Configuration OK’ message appears, the network settings have been saved. 5. Now click ‘Management’ again. Then click the ‘System Restart’ tab, and click ‘RESTART…’. The 2757 will reboot. After about 1 minute, it will be ready for use. 20 2.5 SIP Server Information Setup After the network setup is completed, the SIP server information must be entered. 1. Press ‘Menu’ 2. Press ‘Up’ or ‘Down’ until ‘3. Settings’ is selected, then press ‘Select’. 3. Press ‘Up’ or ‘Down’ until ‘4. System Configuration’ is selected, then press ‘Select’. 21 4. Press ‘Up’ or ‘Down’ until ’14. SIP Proxy’ is selected, then press ‘Select’. Use the numeric keypad to enter the IP address of your SIP proxy. After the IP address is entered, press ‘Save’ to keep changes, or ‘Cancel’ to discard. 5. Press ‘Down’ until ’15. SIP PortNum’ is selected, then press ‘Select’. Enter the SIP server’s port number. By default this is ‘5060’. After the Port Number is entered, press ‘Save’ to keep changes, or ‘Cancel’ to discard. 6. Press ‘Down’ until ’16. SIP Username’ is selected, then press ‘Select’. Use the numeric keypad to enter your SIP username. After the SIP Username is entered, press ‘Save’ to keep changes, or ‘Cancel’ to discard. 22 7. Press ‘Down’ until ’17. SIP Phone Num’ is selected, then press ‘Select’. Use the numeric keypad to enter your SIP phone number. After the SIP Phone Number is entered, press ‘Save’ to keep changes, or ‘Cancel’ to discard. 8. Press ‘Down’ until ’18. SIP Password’ is selected, then press ‘Select’. Use the numeric keypad to enter your SIP phone number. After the SIP Password is entered, press ‘Save’ to keep changes, or ‘Cancel’ to discard. NOTE: The SIP password is hidden by a series of ‘+’ when it is not being edited. 9. Press ‘Down’ until ’19. Codec’ is selected, then press ‘Select’. Use ‘Up’ or ‘Down’ to select a codec. Press ‘Save’ key to store the selection. 23 10. After all the settings are done, press ‘Down’ until ’20. Commit Changes’ is selected, then press ‘Select’. When ’Changes saved’ is displayed on the LCD screen, all the settings are saved. 11. Press ‘Down’ to move to ’21. Reboot System’, and press ‘Select’. ‘Rebooting’ will appear on the LCD screen. After the reboot is completed, the 2757 is ready for use. 24 2.6 SIP Server Information Setup (Web Configuration) The web interface can also be used to enter SIP information. This is the only way to enter multiple SIP usernames and passwords....

Descargar ahora

Introduzca dos números de la imagen: