Votos - 1, Puntuación media: 3 ( )

Fabricar: AT&T Tamaño del archivo: 2.17 mb Nombre del archivo: 4968d39c-665a-4190-b81a-778fee934aec.pdf Idioma del manual:

Observe proper polarity orientation between the BATTERY PACK and BATTERY CHARGER. SAVE THESE INSTRUCTIONS. ATTENTION: The telephone that you have purchased contains a rechargeable BATTERY PACK. The BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. 423 5 Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2. Check to be sure you have all items that come with this cordless telephone system. You should have a HANDSET, BASE UNIT, AC ADAPTOR, TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD ,BELT CLIP and Owner's Manual. 3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION JACK at the back of the BASE UNIT. 4. Plug the AC ADAPTOR into a 120V AC wall outlet. USE ONLY WITH CLASS 2 POWER SOURCE 9V DC,300mA 5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place you purchased your telephone.) 6. Raise or reposition the ANTENNA on the BASE UNIT for the best reception. 7. We recommend not placing this unit next to appliances, Doing so may cause interference. Getting Started 4. Use the dial pad to enter the three digit area code there your phone numbers begins with. 5. Press and hold down the button. 6. Press the button to return to STANDBY mode. E. FLASH TIME This unit enables you to select the standard FLASH TIME applicable to your calling area. If you are not sure of the FLASH TIME you are using ,call your local telephone company. 1.Press the button and hold down. 2.Press the TELEPHONE KEYPAD button. 3.Press the button. 4.Press the SCROLL UP or DOWN button to select the FLASH TIME. The preset FLASH TIME is 600 milliseconds. 5.Press and hold down the button. 6.Press the button to return to STANDBY mode. F. PAUSE TIME This unit enables you to adjust the PAUSE TIME when placing a call using a switchboard system or dialing a Long Distance call. 1. Press the button and hold down. 2. Press the TELEPHONE KEYPAD button. 3. Press the button. 4. Press the SCROLL UP OR DOWN button to adjust the pausing time. The preset pause time is 4 seconds. 5. Press and hold down the button. 6. Press the button to return to STANDBY mode. Caller ID System Operation 22 FLASH EDIT DIR RE/PA SAVE TALK IN USE/CHARGE 2.4GHz / VOICE MAIL / VOICE MAIL / VOICE MAIL / VOICE MAIL / VOICE MAIL SAVE /RE/PA SAVE /RE/PA SAVE /RE/PA EDIT /FLASH EDIT /FLASH L D C C F CALLS AM MIN NEW PM SEC RPT TOTAL BATT MSG DIR Caller ID System Operation Getting Started Getting StartedCaller ID System Operation 6. Press the / VOICE MAIL button to return to the STANDBY mode. NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service from your local telephone company. C. RINGER VOLUME This function enables you to adjust the ringer volume from HI, LOW and OFF as desired. 1. Press the / VOICE MAIL button and hold down. suitable for your convenience. HI is the preset ringer volume. 2. Press the TELEPHONE KEYPAD button. 3. Press the EDIT /FLASH button. 4. Press the SCROLL UP OR DOWN button to adjust the ringer volume 5. Press and hold down the SAVE /RE/PA button. 6. Press the / VOICE MAIL button to return to STANDBY mode. D. AREA CODE At any time during options programming of a home area code where 7-digit is used for ease of call back, please use the following instructions if 10-digit numbers are used in your area. 1. Press the / VOICE MAIL button and hold down. 2. Press the TELEPHONE KEYPAD button. 3. Press the EDIT /FLASH button. BASE UNIT TELEPHONE LINE CONNECTION JACKCONNECTION JACK TONE/PULSE SELECT SWITCH BASE UNIT ANTENNA TELEPHONE JACK TELEPHONE LINE CORD 120VWALL OUTLET AC ADAPTOR 8. Install the BATTERY PACK by plugging it into the BATTERY CONNECTOR inside the BATTERY COMPARTMENT. 9. Place the BATTERY PACK inside the BATTERY COMPARTMENT. 10.Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position. 11.IMPORTANT:Before initial use, charge the HANDSET for 12 hours. 12.TONE/PULSE Select Switch: A. If your home is equipped with a tone dialing system, set the TONE/PULSE select switch to the TONE position. B. If you have a rotary dialing system, set TONE/PULSE select switch to the PULSE position. C. If you are unsure which system you have, set the TONE/PUL...

Descargar ahora

Introduzca dos números de la imagen: