Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
1 Connect the corded handset to the base. 2 Connect the telephone line cord. (figure a) 3 Connect the power cord to the base and an electrical outlet not controlled by a wall switch. (figure a) The answer ON/OFF light goes on, and CL flashes in the message window. Use only the power cord supplied with this p ro d u c t . If you need a re p l a c e m e n t , call 1-8002 2 2 – 3 1 1 1 . 4 Check for dial tone. • Lift the handset, you should hear a dial tone. .NOTE: For Wall Mount Installation see page 5 in the User Manual. Handset Charger Installation 1 Connect the power cord. Be sure to plug the cord into an electrical outlet not controlled by a wall switch. 2 Install the handset battery. Use NiCd Replacement Battery 3301,SKU# 91076. (figure b) 3 Charge the handset battery. • Place the handset in the remote charging stand.The CHARGING light goes on. • Charge the battery at least 12 hours. 4 Check for dial tone. • After the batteries are charged,lift the handset and press ; you should hear a dial tone. Standard electrical outlet Power Cord Line Cord figure b figure a Modular telephone jack a) Remove battery compartment cover by pressing on the indentation and sliding downward. c) Place battery pack in compartment with the wires in the lower left corner, along the bottom of the battery pack. b) Align two holes in plug with socket pins, and snap the plug into place. d) Replace cover by sliding it up into place. F E ATURE SETUP Set the time and date displayed on handset screen If you subscribe to Caller ID service, the date and time will be set automatically with the first incoming call. If you do not have Caller ID service, you can set the date and time manually. • Press , then press until is displayed. Press . • The month is flashing. Use or to select the current month. Press . • The day is flashing. Use or to select the correct day. Press . • The hour is flashing. Use or to select the current hour. Press . • The minute is flashing. Use or to select the correct minute. Press . • or is flashing. Use or to choose between and . Press . Set the phone for tone or pulse dialing (base only) • Press on base. • Press or until and the current setting is displayed,then press . • Use or to select the correct setting. • Press to save the setting. Set the language • Press on the base or on the handset. • Press or until is displayed. • Press , the current setting is flashing. • Use or to select , or . • Press to save the setting. © 2003 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1AT&T 05/03 Answering System P ress to turn the system on or off. When the system is on, you will hear “Machine on” and the ON/OFF light will be lit. If you turn the system on at the first time, it works using the default setting and pre - re c o rded outgoing announcements. For details on re c o rding your own outgoing announcements and changing system s e t t i...
Otros modelos de este manual:Los teléfonos inalámbricos - 1485 (258.11 kb)