Iniciar sesión:
Votos - 6, Puntuación media: 4.2 ( )

Manual de usuario Conair, modelo SYMPHONY 3325

Fabricar: Conair
Tamaño del archivo: 3.67 mb
Nombre del archivo: symphony-3325-user-guide.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


You can set the answering machine to answer after two to eight rings or TIME SAVER. If TIME SAVER is set, the answering machine will answer after 6 rings if there are no new messages already recorded, or after 2 rings if there is a new message, so if you call in for remote access and it doesn't answer after 2 or 3 rings, you can hang up and save on call charges, n Note: If your network voice messaging service (e.g. BT 1571) is enabled, you will need to set the ring delay on your Symphony 3325 to less than 6 rings, otherwise the network service will answer and record incoming calls, and prevent the Symphony 3325 from recording them.n 1. Press

and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select ANSWER DELAY. 4. Press and to select from 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER. (The currently selected option is indicated with a "*".) 5. Press to confirm. 8.5.6 Set the Maximum Recording Time for Incoming Messages You can set the maximum length of the recording time of the incoming messages to be either 60 seconds, 120 seconds, 180 seconds or unlimited (up to the total recording time available). 28 9 TROUBLESHOOTING If you have difficulty with your phone, please try the suggestions listed below. Problem Causes Solutions No dialling tone when pressing key a. The connection cord of the base station is not plugged in. b. The adapter cord is not plugged in correctly in the base station. c. Another handset is using the base to make a call. d. Wrong telephone line cord a. Check the connections. Unplug and plug back in the mains. Check that the telephone line cord has been plugged into the base station and the phone socket. b. Check the mains adapter is firmly plugged into the mains socket and into the base station. c. Wait until the line is unoccupied. d. Use the original line cord supplied. When connected to a PBX, no and/or wrong connection after dialling. Dialling prefix is needed . Insert the dialling prefix "SEARCHING" is displayed. a. Base station out of range. b. Base station not connected to mains. Reduce the range. Connect base station to mains. The call does not work. Service not activated Check your Subscription with network No display. Empty battery Recharge battery Answering Machine The unit does not record new messages. The answering machine is turned off. Turn on the answering machine. The caller cannot leave a message. a. The answering machine is turned off. b. Message memory is full. c. Answer Only mode is set. a. Turn on the answering machine. b. Eraseunnecessarymessages. c. Change to ANS & REC mode. I cannot operate the answering machine remotely. a. You are entering the wrong remote access code b. You are pressing the dial keys too quickly. c. You are using a pulse telephone. a. If you forget the remote access code, reset to the default settings. b. Press each key firmly. c. Try again using a touch tone phone While recording an outgoing message or listening to messages, the unit rings and recording stops. A call is being received. Answer the incoming call and try again to record your out going message later. This telephone is not equipped with a grounding function! Therefore some of the functions may be limited when used in PBX systems. Technical Support If the fault persists... Disconnect all other instruments connected to the same line as the Symphony 3325 system and try to make a call. If the call now works the fault is with the other instruments. Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. Try making a call. If this works, the line is OK. If the call does not work,and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. 10 DECLARATION OF CONFORMITY We the manufacturer/ Importer: Binatone Telecom Pic, 1 Apsley Way London, NW2 7HF Declare under our sole responsibility that the following product Type of equipment: Digital cordless telephone Model Name: Symphony 3325 Series Country of Origin: China Brand: Binatone complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive 2004/108/EC on the approximation of the laws of the Member Statesrelating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard: Radio Spectrum: EN 301406: V1.5.1 : 2003; EMC: EN 301489-1: V1.8.1 : 2008; EN 301489-6: V1.3.1 : 2008; Electrical Safety: EN 60950-1: 2006. Manufacturer / Importer (s...

Otros modelos de este manual:
Los teléfonos inalámbricos - SYMPHONY 3325 (3.67 mb)
Los teléfonos inalámbricos - SYMPHONY 3325 (3.67 mb)
Los teléfonos inalámbricos - SYMPHONY 3325 (3.67 mb)
Los teléfonos inalámbricos - SYMPHONY 3325 (3.67 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría