Votos - 2, Puntuación media: 3 ( )

Fabricar: Conair Tamaño del archivo: 245.72 kb Nombre del archivo: 6066331e-47dc-4be4-917a-64d5d983ef47.pdf Idioma del manual:

Release # when the ‘key’ icon appears on the top line of the display. Your keypad is now locked. To unlock the keypad, press and hold # until the ‘key’ icon disappears. The following numbers can still be dialed when the keypad is locked: 911 000 21 Handset Power You can turn the power off on your Handset. Press and hold DEL/Mute until the screen changes, indicating shut down mode. To power the Handset up again, press and hold DEL/Mute until you see activity on the display. PART III ADVANCED SETTINGS 22 Advanced Settings Menu The Advanced Settings menu gives you access to the following options: RESET HANDSET CHANGE PIN REGISTER SELECT BASE DEREGISTER To access these options, from the idle mode: Press Menu/OK, and then press ^ or Ў until you see >Adv. Settings. Press Menu/OK again. Press ^ or Ў to choose from the list of options above. Reset Handset To restore your Handset to all factory preset settings: When you see >Reset handset, press Menu/OK. Your will see Enter HS PIN: :____. Enter the 4-digit Handset PIN (preset to 0000). Scroll Ў to >YES, and then press Menu/OK. Change Pin (Handset) Your Handset PIN is factory preset to 0000. To prevent unauthorized adjustment of the advanced Handset settings, you can select a new 4-digit PIN (this is optional; you do not have to change the PIN): Scroll Ў to >Change PIN, and then press Menu/OK. Your will see Enter Old PIN :____. Enter the current 4-digit Handset PIN. Enter the New Pin :____. Verify the New Pin :____. You will see Pin Changed. Press DEL/Mute twice to return to the idle screen. Registration (of Handsets) Your Handset is registered to the Base at the factory. Registration allows a Handset to communicate with a Base. You can register 5 additional Handsets (model 588002TP227F) to the Base. To register an additional Handset to the Base: Auto Registration (Recommended) Charge the ‘new’ Handset in its cradle overnight. You will see Not Registered on the display. Place it in the Base. In a short while, usually 60 seconds or less, the new Handset will be registered. The Handset will be assigned a number, located in the lower left corner of the display. Manual Registration Press and hold PAGE on the Base (for approximately 3 seconds) until you hear a soft beep. In the Advanced Settings menu, scroll Ў to >Register, and then press Menu/OK. You will see Select Base. Scroll Ў to the desired Base. If you have one Base, scroll Ў to >Base 1. Press Menu/OK again. You will see Please Wait… When prompted, Enter Base PIN: :____. You will see Please Wait… A tone will confirm registration. The idle screen will be displayed. Select Base If you have registered a Handset to more than one Base, use this feature to select the Base to which you currently want to ‘link’ that Handset (a Handset can be registered to a maximum of 4 Base Units; however, it can only work with one Base at a time): In the Advanced Settings menu, scroll Ў to >Select Base, and then press Menu/OK. You will see a list of a Base Units to which the Handset is registered. You will also see >Automatic. Scroll ^/Ў to a specific Base or Automatic, and then press Menu/OK. If you choose >Automatic, the Handset will search for all Bases to which it has been registered. If it locates more than one Base, the Handset will select the one to which it has been most recently registered. Deregister - Handset From a registered Handset, you can deregister any Handset. The Base will no longer recognize the deregistered Handset: In the Advanced Settings menu, scroll Ў/^ to >Deregister?, and then press Menu/OK. Enter the HS PIN: ____. You will see Deregister >Handset. Press Menu/OK. Scroll ^/Ў to select the desired Handset, and then press Menu/OK. You will see Clear ? Scroll Ў to >Yes, and then press Menu/OK to confirm. Press DEL/Mute twice to return to the idle screen. Deregister – Base From a registered Handset, you can deregister that Handset from one or more Bases to which it is currently linked: In the Advanced Settings menu, scroll Ў/^ to >Deregister?, and then press Menu/OK. Enter the HS PIN: ____. You will see Deregister. Scroll Ў to >Base. Press Menu/OK. You will see Select Base. Scroll ^/Ўto a desired >Base, and then press Menu/OK. A check mark will appear by each Base you select for deregistration. Press Menu/OK again. You will see Clear? Scroll Ў to >Yes, and then press Menu/OK to confirm. Press DEL/Mute twice to return to the idle screen. 23 Base Settings The Base Settings menu gives you access to the following options: AUDIO – Base Ringer Volume and Melody RESET BASE – To all factory preset settings ADDITIONAL – Dial Mode; Flash Time; Prefix Dial No. CALL BARRING – Prevent unauthorized use of your phone BASE PIN – Change Base PIN (default PIN is 0000) To access these options, from the idle mode: Press Menu/OK, and then press ^ or Ў until you see >Base Settings. Press Menu/OK again. Press ^ or Ў to choose from the list of options above. Audio When you see >Audio, press Menu/OK, and then press ^ or Ў to select >Ringer ...

Descargar ahora

Introduzca dos números de la imagen: