Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Reprogram the current time/day. To check the time/day Repeat steps 1 to 6 on page 22. •The current time/day is heard. When finished, press (FUNCTION/EXIT/CH]- For Caller ID service users (p. 29) •The Caller ID information will re-set the clock after the first ring if the adjusted time is incorrect. However, the day will not be re-set by the Caller ID information. Adjust the correct day by following the steps on page 22. • If the time has not previously been set, the Caller ID information will not adjust the clock. •The Caller ID information will automatically adjust the clock for daylight saving time. 23 Preparing the Answering System nnnmif^m—g Selecting the Caller’s Recording Time You can select “1 minute”, “3 minutes” or “greeting only” for the caller's recording time. Your phone comes from the factory set to “3 minutes”. Press [ F UNCTIÖ N/EXIT/CH ). ► Save directory Calling pager ▼A ►-Yes 2 Press B or Q repeatedly until the arrow points to “Program”. Ringer volume ^Program ▼A ►=Yes 2 Press FWD/EDIT B (Yes key). ►Save DIRECT# Set flash time VA ►=Yes 4 Press Q or @ repeatedly until the arrow points to “TAD program”. Talk switching ►TAD program VA ►^Yes 5 Press FWD/EDIT B (Yes key). ©UP" is displayed on the base unit. Answering system setting. Press ©. ©The current setting is displayed on the base unit. 1: 1 minute 2: 3 minutes (factory preset) 3: greeting only Press QQ, ® or (3) to select the recording time. ©The setting is displayed on the base unit. Press FWD/EDIT B (Save key). •A beep sounds. ©To return to the standby mode, press (FUNCTION/EXIT/CH]. If you select “greeting only”, the unit will answer a call with the greeting message, and then hang up. The unit will not record any incoming messages. 24 Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “AUTO” (for Toll Saver*). Your phone comes from the factory set to “AUTO”. ■4 Press [ FUNCTION/EXIT/CH I. ►Save directory Calling pager VA >=Yes 2 Press (▼) or (3 repeatedly until the arrow points to “Program”. 0 Press FWD/EDIT B (Yes key). Ringer volume ►Program TA ►=Yes ►Save DIRECT# Set flash time ▼A ►=Yes 4 Press ® or (3 repeatedly until the arrow points to “TAD program”. Talk switching ►TAD program ▼A ►=Yes 5 Press FWD/EDIT (►] (Yes key). •“P” is displayed on the base unit. Answering system setting. Press ©. •The current setting is displayed on the base unit. Press ©, or {2} to (7] to set the number of rings. 0: Selects “AUTO”. “A” is displayed. 2-7: The unit will answer after the selected number of rings. Press FWD/EDIT B (Save key). •A beep sounds. _ •To return to the standby mode, press [ FUNCTION/EXIT/CH]. *Toll Saver (When set to “AUTO”) When you call the unit from a touch tone telephone: If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call. Making Calls To have a hand-free conversation, connect an optional headset to the Dial a phone number. •The dialed number is displayed. •After a few seconds, the display will show the length of the call and the battery strength. Talk 1112222 Talk 00-00-00 {RBH] 3To hang up, press (TALKl or place the handset on the base unit. If noise interferes with the conversation Press (FUNCTI ON/EX IT/C H ] to select a clearer channel or move closer to the base unit. To redial the last number dialed Press [TALK) * (REDIAL/PAUSE). 26 To dial after confirming the entered number 1 Enter a phone number. Hf you misdial, press [INTERCOM/CLEAR). All digits are erased. Dial the correct phone number. Press [TALK]. •After a few seconds, the display will show the length of the call and the battery strength. To hang up, press [TALK] or place the handset on the base unit. To redial after confirming the last number dialed Press [REDIAL/PAUSE] * [TALK]. To select the receiver volume Press @ or O while talking. •Each time you press (^~) or (▼], the volume level will change. •The display will return to the length of the call. •Your phone comes from the factory set to MEDIUM. •When you replace the battery, the selected receiver volume setting will return to the factory set (MEDIUM). Reprogram if necessary. 27 Answering Calls When a call is received, the unit rings and the CALLER ID indicator on the base unit flashes quickly. If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring (p. 29). In order to view the Caller ID information, please wait until the second ring to answer a call. Lift the handset off the base unit and press (TALK). •You can also answer a call by pressing any dialing button ®to®,®or® {—Any Key Talk). Auto Talk If you set the Auto Talk feature to ON (p. 17), you can answer a call by lifting the handset off the base un...