Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Read and understand all instructions. Thank you for purchasing the Panasonic Cordless Data Link. Jj23 Attach your purchase receipt here. ^jj For your future reference Serial No._ Date of purchase_ (found on the bottom of the unit) Name and address of dealer PLEASE NOTE: ©Communications are transmitted between the base unit and the remote unit up to 28.8 kbps data speed. Based on line and radio conditions, transmission speed will vary. ©This product operates with TOUCH TONE service only. oThis product does not include a modem. 2 ^ Accessories (To order accessories, call 1-800-332-5368.) 3 For Besfl: Performance Battery Charge A rechargeable Ni-Cd battery powers the remote unit. Install the battery (p. 10) and charge it for about 15 hours before initial use (p. 12). Operating Distance/Noise Communications are transmitted between the base unit and the remote unit using wireless radio waves. For maximum distance and noise free operation, the recommended base unit location is: Away from electrical appliances such as In HIGH and CENTRAL location with no obstructions o|f the link is cut off frequently, set the modem speed to a slower setting. oSome wireless transmission equipment operate at frequencies that may interfere with the base unit and the remote unit. To minimize or prevent such interference, the units should not be placed near other wireless transmission equipment. Cortemfe Œfëp&Misoo_ Location of Controls................................ 6 Remote Unit................................................ 6 Base Unit.................................................... 8 Settings .......................................... 10 Installing the Battery in the Remote Unit................................................10 Connection ................................................................................................11 Battery Charge............................................................................................12 Mounting the Remote Unit........................................................................14 (sfimfflsoo_ Operation.......................................... 16 (VMM(MtmmiÊSOO_ Optional AC Adaptor .............................. 18 Battery Replacement .............................. 19 Before Requesting Help ............................ 20 Protecting the 900MHz Cordless Data Link .......... 22 Important Safety Instructions ...................... 23 FCC and Other Information.......................... 26 5 Location ©if Controls Remote Unit Do not force the antenna beyond the stopper. The antenna rotates approximately 270 degrees. Antenna (p. 14) Antenna Stopper MODEM Jack (p. 15) Optional AC Adaptor Jack {p. 18) IN USE/RANGE Indicator (p. 7) BATT(Battery) LOW/CHARGE Indicator (p. 7) POWER Indicator (p. 7) Charge Contacts (p. 13) Mounting Rails (p. 14) Remote Unit Cover (P- 10) POWER Switch (p. 16) 6 о Remote unit indicator IN USE/RANGE indicator Green The communication quality between the remote unit and the base unit is good. Flashing Green The remote unit is in channel search mode or receiving an incoming call. Amber The signal is weak. Communication between the remote unit and the base unit may be impaired. Red Move the remote unit closer to the base unit quickly and adjust the antenna, or communication between the remote unit and the base unit will be terminated within 30 seconds. Off Not active. The POWER switch is OFF or in standby mode. BATT(Battery) LOW condition ВАТТ LOW/CHARGE Indicator Beep Operation Flashing Red every minute Standby Flashing Red every 3 minutes Power off Off — If the remote unit is connected to the optional AC adaptor (p. 18), the ВАТТ LOW/CHARGE indicator remains solid red. POWER indicator Power off Off Power on Green c> Location of Controls Base Unit The antenna rotates approximately 200 degrees. 8 Base unit indicator CHARGE indicator Red The remote unit’s battery is being charged. This is normal when the remote unit is on the base unit. Off The base unit is in the standby mode. 0|f the remote unit is connected to the optional AC adaptor (p. 18): —When the remote unit is placed on the base unit, the CHARGE indicator will not light. —When the unit is not communicating, the battery is charged by the optional AC adaptor. IN USE indicator Green An active connection has been made between the base unit and the remote unit. Flashing Green rapidly When the remote unit is turned on, the Indicator will flash rapidly for about 30 seconds. Flashing Green slowly The signal is weak. Move the remote unit closer to the base unit quickly and adjust the antenna. If the indicator does not light steady green, communication between the remote unit and the base unit will be terminated within 40 seconds. Off The base unit is in the standby mode. tetimgs Installing the Battery in the Remote Unit 1 Install the battery as shown observing the proper polarity. The connector is keyed and can...