Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
o“Set time” is announced. The time/day will be heard if it was adjusted beforehand. Enter the current time (hour and minute) by using a 4-digit number. (Ex. To set 9:30, enter “0930".) ©The entered number is displayed. Press [*] to select “AM” or “PM". Press («] repeatedly to set the day. When finished, press PROGRAM/2WAY REC . oThe unit announces the time/day. The clock starts working. O OOO ooo Ooo TALK Indicator y (PROGRAM/2WAY REC] (SCREEN/PLAYBACK) and Indicator ©In step 4, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100” and select “PM” by pressing (*).) ©The accuracy of the clock is approximately ±45 seconds a month at room temperature. To check the time/day Press (PROGRAM/2WAY REC) =» (SCREEN/PLAYBACK) ^ ®. ©The current time/day is heard. When finished, press (PROGRAM/2WAY RE~Cl. 15 Programmable Preparations Selecting ttlhe Caller’s Recording Time You may select the caller’s recording time as either “1 minute”, “unlimited” or “greeting only”. The factory preset is “unlimited”. 1 4 Press [ PROGRAM/2WAY REC). oThe TALK indicator flashes. Press fSCREEN/PLAYBACK]. oThe indicator lights. o“P” is displayed on the base unit. Press (5). oThe current setting is displayed. 1: 1 minute 2: unlimited (factory preset) 3: greeting only Press (T), (2} or (3} to select the recording time. oThe setting is displayed. When finished, press [ PROG RAM/2 WAY REC). oThe indicator lights go out. O O 89° ooo TALK Indicator \ [PROGRAM/2WAYREC f SCREEN/PLAYBACK and Indicator If you select “greeting only”, the unit will answer a call with the greeting message, and then hang up. The unit will not record any messages. 16 Selecting the Number of Rings You may select the number of rings before the answering system answers a call, from “1” to “7" or “AUTO (for Toll Saver)”. The factory preset is “AUTO”. 1 Press [ PR0GRAM/2WAY REC |. ©The TALK indicator flashes. 4 Press [ SCREEN/PLAYBACK 1. oThe indicator lights. o“p” is displayed on the base unit. Press (2). ©The current setting is displayed. Press a dialing button (o) to (7) to set the number of rings. 0: Selects “AUTO”. “A” is displayed. 1-7: The unit will answer after the selected number of rings. When finished, press [PROGRAM/2WAY REC l. oThe indicator lights go out. Toll Saver (When set to “AUTO”) When you call the unit from a touch tone telephone: If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call. 17 [$> Programmable Preparations Setting ttlhe CPC (Calling Party control) Function The CPC function is preset to “A”. If you use a call waiting service, set to “b”, or the call waiting tone will disconnect someone leaving a message. 1. Press f PRÔGR AM/2 WAY REC J. 2. Press [SCREEN/PLAYBACK]. 3. Press (3). ©The current setting, “A” or “b”, is displayed on the base unit. 4. To select “b”, press (2). OR To select “A”, press (T). oThe setting is displayed. 5. When finished, press (PROGRAM/2WAY RECl. When your greeting message is being played to the caller, you can also listen to it through the speaker. To listen to your greeting, set to “2 (ON)”. The factory preset is “1 (OFF)”. 1. Press f PROGRAM/2WAY RECl. 2. Press [SCREEN/PLAYBACK). 3. Press ®. oThe current setting, “1” or “2”, is displayed on the base unit. 4. To select “2 (ON)”, press (2). OR To select “1 (OFF)”, press (T). oThe setting is displayed. 5. When finished, press [ PROGRAM/2WAY RECl. 18 1 Press (Talk]. oThe TALK indicator lights. Dial a telephone number. o|f you misdial, press (FLASH) firmly then dial again. To hang up, press [TALK] or place the handset on the base unit. oThe TALK indicator light goes out. [TALK land Indicator ooo 88° [FLASH] o|f an alarm tone sounds in step 1, move closer to the base unit or place the handset on the base unit. Then try again. To redial the last number dialed Press [TALK] O- [REDIAL]. To select the receiver volume Press (LOUD/RINGER) while talking. oEach time you press the button, the volume level will change from MEDIUM (preset) to HIGH to LOW. If noise interferes with the conversation Press iCHl to select a clearer channel or move closer to the base unit. Answering Calls If the handset is off the base unit, press [TALK]. oYou can also answer a call by pressing any dialing button 0 to 9, or # (—Any Key Talk). OR Adjusting the handset ringer volume The TALK indicator light must be off. °To select HIGH (preset) or LOW, press (LQUD/RlNGERj briefly. (Each time you press the button briefly, the selected volume rings and the ringer volume will change.) ©To turn the ringer OFF, press and hold [LOUD/RINGER] until 2 beeps sound. oTo turn the ringer ON, press [LOUD/RINGER] briefly. The ringer sounds at the HIGH level. Lighted handset keypad (KX-TCM412-B on...