Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
When finished, press (PROGRAM/2WAY REC). C> Programmable Preparations Selecting the Caller’s Recording Time You may select the caller’s recording time as either “1 minute”, “unlimited” or “greeting only”. The factory preset is “unlimited”. 1 4 Press (PROGRAM/2WAY RECl. ©The TALK indicator flashes. Press [SCREEN/PLAYBACK). ©The indicator lights. ©“P” is displayed on the base unit. Press (5). oThe current setting is displayed. 1: 1 minute 2: unlimited (factory preset) 3: greeting only Press (T), ® or (3) to select the recording time. ©The setting is displayed. When finished, press [ PROGRAM/2WAY REC). ©The indicator lights go out. O°o o OOO OOO OOO TALK Indicator \ ( PROGRAM/2WAY REC] (SCREEN/PLAYBACK) and Indicator o|f you select “greeting only”, the unit answers a call with the greeting message, then hangs up. The unit will not record any messages. 16 o Selecting the Number of Rings You may select the number of rings before the answering system answers a call, from “1” to “7” or "AUTO (for Toll Saver)”. The factory preset is “AUTO”. 1 2 3 4 Press [PR0GRAM/2WAY REC). oThe TALK indicator flashes. Press [SCREEN/PLAYBACK). oThe indicator lights. o“P” is displayed on the base unit. Press (2). oThe current setting is displayed. Press a dialing button (o) to (7) to set the number of rings. 0: Selects “AUTO". “A” is displayed. 1-7: The unit will answer on the selected number of rings. When finished, press [ PROGRAM/2WAY REC]. ©The indicator lights go out. and Indicator Toll Saver (When set to “AUTO”) When you call the unit from a touch tone telephone: If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call. 17 C> Programmable Preparations Setting the CPC (Calling Party control) Function The CPC function is preset to “A”. If you use a call waiting service, set to “b”, or the call waiting tone will disconnect someone leaving a message. 1. Press [PROGRAM/2WAY~REC). 2. Press [SCREEN/PLAYBACKI. 3. Press (3). oThe current setting “A” or “b” is displayed on the base unit. 4. To select “b”, press ©. OR To select “A”, press (T). oThe setting is displayed. 5. When finished, press IPROGRAM/2WAY REC]. Setting the Greeting Monitor Function When your greeting message is being played to the caller, you can also listen to it through the speaker. To listen to your greeting, set to “2 (ON)”. The factory preset is “1 (OFF)”. 1. Press f PROGRAM/2WAY REC). 2. Press [SCREEN/PLAYBACK]. 3. Press (D- oThe current setting “1” or “2” is displayed on the base unit. 4. To select “2 (ON)”, press (2). OR To select “1 (OFF)”, press (T). oThe setting is displayed. 5. When finished, press (PROGR AM/2WAY REC I. 18 Making Calls 1 Press (TALK). oThe TALK indicator lights. Dial a telephone number. o|f you misdial, press [ FLASH) firmly then dial again. To hang up, press [TALK] or place the handset on the base unit. oThe TALK indicator light goes out. (TALK land Indicator o|f an alarm tone sounds in step 1, move towards the base unit or place the handset on the base unit. Then try again. To redial the last number Press (TALK] => (REDIAL]. To select the receiver volume LOW, MEDIUM (preset) or HIGH Press ILOUD/RINGER I while talking. oEach time you press the button, the volume level will change. (MEDIUM * HIGH => LOW => MEDIUM ■■•) If noise interferes with the conversation Press [ CH) to select a clear channel or move closer to the base unit. Answering CaDDs If the handset is off the base unit, press [TALK). ©You can also answer a call by pressing any dialing button 0 to 9, *, or # (—Any Key Talk). OR Adjusting the handset ringer volume Be sure the TALK indicator light is off. 0T0 select HIGH (preset) or LOW, press (LOUD/RINGER ] tightly. (Each time you press the button, the ringer volume will change.) 0T0 turn the ringer OFF, press (LOUD/RINGER) until 2 beeps sound. oTo turn the ringer ON, press [LQUP/RlNGERl lightly. The ringer sounds at the HIGH level. 20 Äytomaiiic Dosing o Storing Phone Numbers in Memory You can store up to 10 numbers in the handset. The dialing buttons (0 to 9) function as memory stations. The TALK indicator light must be off. 1 4 Press [ PRQGRAM/2WAY~REC). oThe TALK indicator flashes. Enter a phone number up to 16 digits. o|f you misdial, press iPROGRAM/2WAY REC) to end storing, then restart from step 1. Press (AUTO). Press a memory station number (0 to 9). oA confirmation tone sounds. oTo store other numbers, repeat steps 1 through 4. o°o Ooo Q.oo TALK Indicator (ÄÜTQ) Memory Station Number fPROG RAM/2 WAY REC, *What the confirmation tone means 1 beep: The new number is stored. 2 beeps: The number is the same as a previously stored one. C> Automatic Dialing To erase a stored number Press iPRQGRAM/2WAY REC] *> (AUTO) *> the memory station numbe...