Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
This will maximize the battery life. •The battery cannot be overcharged. Selecting the Dialing Mode You can program the dialing mode by using the handset near the base unit. If you have touch tone service, set to TONE. If rotary or pulse service is used, set to PULSE. The factory preset is TONE. The TALK and DIGITAL SP-PHONE indicator lights must be off before programming. 1 Press [ PROGRAM/2WAY REC). •The TALK indicator flashes. Press (autoI. To select PULSE, press (H) twice. OR To select TONE, press (*] twice. When finished, press (PROGRAM/2WAY REC j. •A confirmation tone sounds.* •To cancel during programming, press (PROGRAM/2WAY REC I, then start from step 1. • If 3 beeps sound during programming, a wrong key was pressed. Restart from step 1. *What the confirmation tone means 1 beep: The mode is different from the previously selected one. 2 beeps: The mode is the same as the previously selected one. If a power failure occurs, the mode will return to the factory preset (TONE). Reprogram if necessary. 12 Greeting Message You can record a personal greeting message. If not, one of two prerecorded greetings will be played when a call is received (p. 14). All messages (greeting, incoming, memo, etc.) are stored in digital memory (p. 37). The total recording time is about 16 minutes. We recommend you record a brief greeting message (see the sample below) in order to leave more time for recording new messages. To record a greeting message 1 4 Press f GREETING REC) to start the recording mode. o“Press RECORD again to record greeting.” is heard. Within 5 seconds, press (GREETING REC I again to record your greeting. ©A long beep sounds. After the long beep, talk clearly about 8 inches (20 cm) away from the MIC (microphone). oThe display shows the elapsed recording time. When finished, press (STOP). oTo check the recorded greeting, press (GREETING CHECK oTo change the message, repeat from step 1. GREETING CHECK (GREETING REC) MIC Greeting message sample “Hello, this is (your name and/or number). Sorry I cannot take your call. Please leave a message after the beep. Thank you.” 13 Greeting Message To erase the recorded greeting message Press (GREETING CHECK] press [ERASE] while the message is being played. •The unit will answer a call with a pre-recorded greeting. Pre-recorded greeting message If you do not record a greeting message (p. 13), one of the following two messages will be played when a call is received depending on the caller’s recording time (p. 17). To check the pre-recorded greeting, press (GREETING CHECK]. •A pre-recorded greeting will be played as below. ■When the recording time is set to "1 minute” or “unlimited”; “Hello, we are not available now. Please leave your name and phone number after the beep. We will return your call.” . BWhen the recording time is set to “greeting only”; “Hello, we are not available now. Please call again. Thank you for your call.” □ [GREETING CHECK] [ERASE] To increase the volume, press VOLUME (3). To decrease, press VOLUME £7). 14 Programmable Preparations » You can program the following functions by using the handset near the base unit. See the noted pages for details. The TALK and DIGITAL SP-PHONE indicator lights must be off before programming. Lift the handset, then press [ PROGRAM/2WAV REC]. I Press [SCREEN/PLAYBACK). • If an alarm tone sounds, move towards the base unit, then try again. To adjust the time and day, press (0). (page 16) To set the remote code, press (T). (page 43) To select the number of rings, press (2). (page 18) To set the CPC function, press (3). (page 19) To set the greeting monitor function, press (4). (page 19) To select the caller’s recording time, press ©. (page 17) To store the pager number, press (page 40) I When finished, press (PR0GRAM/2WAY REC). •A confirmation tone sounds.* •To cancel during programming, press (PROGRAM/2WAY REC], then start from the beginning. • If 6 beeps sound during programming, a wrong key was pressed. Enter the correct number again. *What the confirmation tone means 1 beep: The new programmed number is stored. 2 beeps: The number is the same as the previously stored one. 6 beeps: The number is not correct. Try again from the beginning. If a power failure occurs, the setting will return to the factory preset. Reprogram if necessary. t Programmable Preparations Time and Day Adjustment Voice Time/Day Stamp: During playback, a synthesized voice will announce the time and day when each message was recorded. 1 Press [ PROGR AM/2WAY REC i. •The TALK indicator flashes. Press [SCREEN/PLAYBACK]. •The indicator lights. •“P” is displayed on the base unit. Press ©■ •“ 0 ” is displayed. •“Set time" is announced. The time/day will be heard if it was adjusted beforehand. Enter the current time {hour and minute) by using a 4-digit number. (Ex. To set 9:30, enter “0930”.) •The entered number is displayed. Press (*) to select “AM” ...