Votos - 3, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
1 Press [FUNCTION] 5 times until “RINGER” is displayed. 2 Select “ON” or “OFF” by using [] or []. 3 Press [EDIT], then press [OFF]. Note: • When the ringer is set to off, the handset does not ring for outside calls. Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is “TONE”. “TONE”: For tone dial service. “PULSE”: For rotary pulse dial service. 1 Press [FUNCTION] 6 times until “DIAL MODE” is displayed. 2 Select “PULSE” or “TONE” by using [] or []. 3 Press [EDIT], then press [OFF]. Note: • For KX-TG2122 users: When you change the dialing mode setting, make sure you change it on both handsets. Resetting the handset to its default setting Feature Default setting Language ENGLISH Area code --- Ringer tone RINGER TONE 1 Ringer ON Dial mode TONE Default setting NO Receiver volume level Vol. 2 1 Press [FUNCTION] 7 times until “DEFAULT” is displayed. 2 Select “YES” or “NO” by using [] or []. 3 Press [EDIT]. Introduction 1 Introduction Thank you for purchasing a Panasonic cordless telephone. We recommend keeping a record of the following information for future reference. Serial No. Date of purchase (found on the bottom of the base unit) Name and address of dealer Attach your purchase receipt here. 4 Important safety instructions When using the product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read all instructions carefully. 2. Follow all warnings and instructions marked on the product. 3. Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. Use a moist cloth for cleaning. 4. Do not use the product near water, for example near a bathtub, wash bowl, kitchen sink, etc. 5. Place the product securely on a stable surface. Serious damage and/or injury may result if the product falls. 6. Do not cover slots and openings on the product. They are provided for ventilation and protection against overheating. Never place the product near radiators, or in a place where proper ventilation is not provided. 7. Use only the power source marked on the product. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. 8. Do not place objects on the power cord. Install the product where no one can step or trip on the cord. 9. Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. 10 Never push any objects through slots in the product. This may result in the risk of fire or electric shock. Never spill any liquid on the product. 11. To reduce the risk of electric shock, do not disassemble the product. Take the product to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the product is subsequently used. 12. Unplug the product from power outlets and take to an authorized service center when the following conditions occur: A. When the power cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorized service center. E. If the product has been dropped or physically damaged. F. If the product exhibits a distinct change in performance. 13. During thunderstorms, avoid using telephones except cordless types. There may be a remote risk of an electric shock from lightning. 14. Do not use the product to report a gas leak, when in the vicinity of the leak. SAVE THESE INSTRUCTIONS CAUTION: Installation • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. • Do not touch the plug with wet hands. • The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. Battery To reduce the risk of fire or injury to persons, read and follow these instructions. • Use only the battery(ies) specified. • Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions. • Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. • Exercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or t...