Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Place on cradle and try again.” is displayed. • If [ ], [ ] or any other buttons except [MUTE] and [OFF] is pressed while the handset is on the base unit, the handset beeps 3 times and “Please lift up and try again.” is displayed. Lift the handset and press the button again. Function Menu Table You can use the following functions to customize your unit. See the corresponding pages for function details. • After pressing [MENU], you can also program menu items by direct commands ([0] to [9]) instead of using the soft keys (p. 42). Set flash time Set line mode Main menu Sub-menu I Sub-menu II Ringer setting V.M. access Initial setting LCD contrast Auto talk Voice enhancer Store VM access# VM tone detect Set tel line Voice Mail Change language Set dial mode Ringer volume Ringer tone Caller ID edit p. 13 p. 37 p. 17 p. 33 p. 14 p. 34 p. 16 p. 17 p. 15 p. 15 p. 13 p. 25 p. 32 Programmable Functions Display Language You can select either ENGLISH or SPANISH as the display language. The factory preset is ENGLISH. > 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [] or [], then press Select. > Initial settingExit Select>> > > 3 Scroll to “Change language” by pressing [] or [], then press Select. 4 Select the language by pressing Espanol or English. Change languageBack Select>> Change language:EnglishEspanol Save 5 Press Guard. or Save, then press [OFF]. Dialing Mode If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set dialing mode to “Pulse”. The factory preset is “Tone”. > > 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [] or [], then press Select. Initial settingExit Select>> > > 3 Scroll to “Set tel line” by pressing [] or [], then press Select. 4 Press Select at “Set dial mode”. Set tel line Back Select>> Set dial mode Back Select>> Set dial mode :Tone Back Save>> Preparation > > 5 Select “Pulse” or “Tone” by pressing [] or []. 6 Press Save, then press [OFF]. 13For assistance, please call: 1-800-211-PANA(7262) Programmable Functions Voice Enhancer Technology Voice Enhancer Technology ( ) helps clarify and improve sound reception creating a natural-sounding voice that is easy to hear and understand. This is accomplished by enhancing the frequency that is narrowed through the telephone line and comes pre-set to OFF at the factory. Under normal conditions, cordless phones are limited to a narrowed frequency bandwidth (300Hz to 3.5KHz). Panasonic’s new Voice Enhancer Technology cordless phones are able to simulate a band signal above and below the normal bandwidth limitations. As a result, a clearer, crisp sound much closer to the actual voice is achieved. •“ ” is displayed when the Voice Enhancer Technology is set to ON. 1 Press [MENU]. 2 Scroll to “ > > > Voice enhancer” by pressing [] or [], then press Select. > On”or “Off” by pressing [] or []. Voice enhancer Exit Select>> Voice enhancer :Off Back Save>> 3 Select “ 4 Press Save, then press [OFF]. Helpful hint: Depending on the condition and quality of your telephone line, Voice Enhancer may emphasize the noise already on the line. If it becomes difficult to hear the caller, please set Voice Enhancer mode to OFF. To turn the mode ON while talking, press (VE). •“ ” is displayed. •Each time you press (VE), the mode will change to ON Talk (VE) 00-00-32 Hold or OFF. •If you store a voice mail access number (p. 32), “VM”will be displayed instead of “(VE)” for 15 seconds after pressing [ ] or [ ]. Programmable Functions Auto Talk The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing [ ] or [ ]. To use this feature, turn the feature ON. The factory preset is OFF. > 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [] or [], then press Select. > Initial settingExit Select>> 3 Scroll to “Auto talk” by pressing [] or [], then press Select. > > Auto talk Back Select>> > 4 Select “On” or “Off” by pressing [] or []. > 5 Press Save, then press [OFF]. Auto talk :Off Back Save>> • In order to view Caller ID information after you lift up the handset to answer a call, leave the Auto Talk feature OFF. LCD Contrast You can select the handset LCD contrast (5 levels). The factory preset is level 3. > > 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [] or [], then press Select. Initial settingExit Select>> 3 Press Select at “LCD contrast”. LCD contrast Back Select>> > > > > 4 Select the desired contrast by pressing [] or []. • Each time you press [] or [], the LCD contrast will change. LCD contrast Low High Save Back > > Preparation 5 Press Save, then press [OFF]. 15For assistance, please call: 1-800-211-PANA(7262) Programmable Functions Ringer Volume You can select the handset ringer volume HIGH, MEDIUM, LOW or OFF. The factory preset is HIGH. If set to OFF, the handset will not ring. 1 Press [MENU]. 2 Press Select at “Ringer setting”. Ringer setting Exit Select>> 3 Press Select at “Ringer volume”. Ringer volumeBack Select>> 4 Select the desired volume level...