Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
Mount the unit, then slide down. • Raise the antenna. • Fasten the telephone line cord to prevent it from being disconnected. 5 To charge the handset battery: Fix the charge contacts ( ) and fit the handset hole into the hook ( ). • The IN USE/CHARGE indicator lights and the unit beeps once. 1 2 2 1 1 1 2 2 1 To Power Outlet Hook Hooks 1 2 2 1 Hook Hole OR Belt Clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on page 2. Connecting an optional headset to the handset Open the headset jack cover, and insert the headset plug into the headset jack as shown below. Headset Jack • Headset sold separately. Model shown here is KX-TCA88. To switch to the speakerphone while using the headset: Press [ ]. To return to the headset, press []. For assistance, please call: 1-800-211-PANA(7262) 49 Useful Direct Commands Handset After pressing [MENU], you can also program menu items by direct commands ([0] to [9]) instead of using the soft keys. Ringer setting[1] Ringer volume Ringer tone Message play Date and time Voice enhancer Caller IQ : Off : Low : Medium : High : On : Off : Activate CIQ : View Info. : Get new Info. : Turn CIQ off : Turn CIQ on[1] – : tone pattern 1–6 [0] [1] [2] [3] [2] [1] [6] [2] [4] [5] [1] [0] [7] [1] [2] [3] [4] [5] p. 17 p. 18 p. 41 p. 12 p. 14 p. 58 p. 57 p. 55 p. 55 Intercom Talk Caller ID [8] [9] [1] [0] p. 36 p. 15 : On : Off During programming: To save the setting, press the right soft key (Save). To exit the programming, press [OFF]. • If you press the direct command incorrectly, exit the programming. Then re-enter the programming by pressing [MENU]. • For function details, see the corresponding pages. *1 Can be used to activate Caller IQ. See the leaflet included in the unit for more information. *2 For openLCR subscribers only. LCD contrast Auto talk Caller ID edit Set tel line Set answering Initial setting Change language : English : Spanish– : level 1–5 : On : Off : On : Off Set dial mode Set flash time Set line mode : Pulse : Tone :700ms:400ms:250ms:100ms : A : B Number of rings Remote code Recording mode – : 2–7 rings : Toll saver – : 00–99 : Standard recording : Enhanced recording Recording time [0] [1] [1] [5] [3] [1] [0] [4] [1] [0] [5] [1] [1] [2] [2] [1] [3] [5] [7] [3] [1] [2] [6] [1] [2] [0] [2] [3] [0] [4] [1] [2] [8] [1] [2] [9] [2] [4] [6] [8] [7] [1] : 1min [2] : 2min [3] : 3min [0] : Greeting only p. 16 p. 15 p. 29 p. 21 p. 20 p. 45 p. 21 p. 13 p. 13 p. 38 :600ms :300ms :110ms :90ms p. 14 Troubleshooting Cordless Telephone Cause & Remedy • You are too far from the base unit. Walk closer and try again. • Place the handset on the base unit and try again. • Plug in the AC adaptor. • Raise the base unit antenna. • Move the handset and the base unit away from other electrical appliances (p. 3). • Walk closer to the base unit. • Raise the base unit antenna. • Select a clearer channel (p. 23, 36). • The ringer volume is set to OFF. Set to HIGH, MEDIUM or LOW (p. 17). • Charge the battery fully (p. 8). • Programming is not possible while the unit is being used. • Do not pause for over 60 seconds while programming. • Walk closer to the base unit. • A call is coming in. To answer the call, press [] or [ ]. Start again from the beginning after hanging up. • Your handset is in remote operation mode (p. 41). Exit by pressing [OFF]. • If the last number dialed was more than 32 digits long, the number will not be redialed correctly. • You need to subscribe to a Caller ID service. • Other telephone equipment may be interfering with your phone. Disconnect it and try again. • Other electrical appliances connected to the same outlet may be interfering with Caller ID. • Telephone line noise may be affecting Caller ID. • The caller requested not to send his/her Caller ID information (p. 25). • If a Caller ID box is connected between the unit and the telephone wall jack, disconnect the Caller ID box or plug the unit directly into the wall jack. Useful Problem “No link to base. Place on cradle and try again.” is displayed and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The handset does not ring. The handset display is blank. You cannot program function items. While programming or searching, the unit starts to ring and stops the program/ search. You cannot make a call with the handset. You cannot redial. The unit does not display the caller’s name and/or phone number. For assistance, please call: 1-800-211-PANA(7262) 51 Troubleshooting The handset display exits the Caller List or phone book. • Do not pause for over 60 seconds while searching. You cannot page the handset or base unit. • The handset is too far from the base unit. ...