Votos - 5, Puntuación media: 3.8
(
)
)
|
Otros manuales para este modelo:
Los teléfonos inalámbricos - KXTG4772 (1.81 mb)
Los teléfonos inalámbricos - KXTG4772 (1.68 mb)
Resumen del manual
– facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a softmoist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Notice for product disposal, transfer, or return R This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 0.9 W Maximum: Approx. 1.5 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 2.0 W For assistance, please visit Important Information R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) Note: R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. For assistance, please visit Getting Started Setting up Connections R Use only the supplied Panasonic AC adaptor PNLV226. • Base unit Correct*DSL/ADSL filter (not supplied) is required if you“Click” “Click” “Click” have DSL/ADSL service. IncorrectPress plug firmly. HookTo power outletDSL/ADSL filter* To single-line telephone jack (RJ11C) nCharger To power outletHooks Battery installation R USE ONLY Ni-MH batteries AAA (R03) size. R Do NOT use Alkaline/Manganese/Ni-Cd batteries. R Confirm correct polarities ( , ). Rechargeable Ni-MH ONLY R When the date and time setting is displayed, see page 12. Battery charging Charge for about 7 hours. R When the batteries are fully charged, “Fully charged” is displayed. Confirm “Charging” is displayed. For assistance, please visit Getting Started Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. During a power failure The base unit will work as a standard telephone using power from the telephone line, so you can make and answer outside calls with the corded handset. However, this operation may not work properly depending on area or telephone line’s condition. The base unit speakerphone and the cordless handset will not function during a power failure. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 5. R Wipe the battery ends ( , ) with a dry cloth. R Avoid touching the battery ends ( , ) or the unit contacts. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 13 hours max.*1 N...