Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
For assistance, please call: 1-800-211-PANA(7262) 65 Useful Informatio n Canceling Registration/Re-registration Make sure the base unit and the other handsets are not being used. Have both the handset and base unit nearby during registration. If you have canceled handset registration at a previous base unit (p. 65), start from step 5. 1 Handset: Press [MENU]. 2 Handset: Scroll to .Initial setting. by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting 3 Handset: Scroll to .Registration. by pressing [d] or [B], then press the soft key ( SELECT ). Registration 4 Handset: Press the soft key ( SELECT ) at .HS registration.. HS registration 5 Base unit: Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds. . The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 6 Handset: (1) Press the soft key ( OK ). (2) Wait until a long beep sounds and the display shows the new extension number (ex. extension number 2). . Registration is complete. Press LOCATOR on base unit for 3 sec. Then press OK BOX 1 BOX 2 OK SPIPRIVACY1Handset [2]Registered IN USE [2] . You can stop registration by pressing [OFF] on the handset and pressing [LOCATOR/INTERCOM/TRANSFER] on the base unit. . If .Wrong handset Refer to manual. is displayed, the handset you tried to register is not for this base unit. This handset is for KX-TG6500 base unit. The accessory handsets for this base unit are KX-TGA520 and KX-TGA523. To order, see page 3. If you have not canceled the handset.s registration at the previous base unit (p. 65), the handset number remains in that base unit.s memory. To erase the handset number from the previous base unit, see the base unit.s Operating Instructions. For the KX-TG5230 base unit: (1) Press and hold [LOCATOR/ INTERCOM/TRANSFER] for 3 seconds, and (2) Press and hold the handset number [1] () to [4] () that you do not want for 5 seconds. A long beep sounds, then the handset number is erased. If the Following Appear on Your Display... The following will be displayed when the unit needs your attention. Display message Cause & Remedy Recharge battery . The battery needs to be charged. Recharge the battery (p. 13). Charge for 6 HRS . The battery has been discharged. The handset will not work. Fully charge the battery (p. 12). No link to base. . The handset has lost communication with the base Move closer to base and try again. unit. Walk closer to the base unit, and try again. . Confirm the base unit.s AC adaptor is plugged in. . Raise the base unit antennas. . The handset.s registration may have been canceled. Re-register the handset (p. 65, 66). Please lift up and try again. . A handset button was pressed while the handset was on the base unit (or the charger, for accessory handset users, p. 3). Lift the handset and press the button again. Busy . The called base unit or handset is in use. . Privacy mode is on for the call you tried to join (p. 54). . The handset you tried to send phone book items to is in use. . The handset you are calling is too far from the base unit. Invalid . The called handset has not been registered to the base unit. . You selected your own extension number. Error!! . When you tried to register or deregister the handset, the handset and base unit could not link for some reason, such as interference from electrical appliances. Move the handset and base unit away from any electrical appliances and try again. . If more than one handset is in use, you may not be able to register/deregister. Try again later. . Another handset tried to send phone book items to you but copying stopped. Have the other handset user re-send the items to you (p. 39, 40). System is busy. . If more than one other user is using the handset and/ Please try again later. or base unit, such as conducting outside/intercom calls, you may not be able to use the handset. Try again later. . The handset has lost communication with the base unit. Walk closer to the base unit and try again. Useful Informatio n For assistance, please call: 1-800-211-PANA(7262) 67 If the Following Appear on Your Display... Display message Cause & Remedy Phone book full . When you tried to store an item in the phone book, the phone book memory was full. Press [OFF] to exit programming mode. To erase other items from the phone book, see page 38. ---Incomplete--. When the displayed item was sent to the destination Tom Jones 098-765-4321 Phone book full (The name/number is handset, the phone book memory was full and copying stopped. If you tried to send all of the items, the item displayed with .Incomplete. and items after an example.) it have not been copied to the destination handset. Press [OFF] to exit (p. 39, 40). To erase items from the destination handset phone book, see page 38. You can copy all of the items again or copy the items which have not been copied one by one (p. 39, 40). ---Incomplete--Tom Jones 555-765-4321 (The name/number is an example.) . The ...