Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
3 When the other party answers, talk into the MIC (microphone). 4 To hang up, press [SP-PHONE]. • The SP-PHONE indicator and line button lights go out. • To switch to the handset while using the base unit speakerphone: — If the handset is off the base unit, press the line soft key ( LINE1 ) or ( LI NE2 ) on the handset, then press [SP-PHONE] on the base unit. — If the handset is on the base unit, just lift up. • The line buttons show the status of each line (p. 37). Hands-free Digital Duplex Speakerphone For best performance, please note the following: • Talk alternately with the other party in a quiet room. • If you or the other party has difficulty hearing, press [d] to decrease the speaker volume. To adjust the speaker volume during a conversation To increase volume, press [B]. To decrease volume, press [d]. • There are 8 volume levels. If you try to increase/decrease volume when it is at the maximum/minimum level, the base unit beeps 3 times. The level is displayed on the base unit. Making Calls To redial the last number dialed Press [SP-PHONE] or a line button, then press [REDIAL/PAUSE]. To put a call on hold Press [HOLD] during a conversation. • The line button flashes. To return to the call, press the line button that is flashing. • The handset users can also take the call by pressing the line soft key ( ) or ( LINE1 LINE2 ). • If another phone is connected on the same line (p. 11), you can also take the call by lifting its handset. • If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold the call will be disconnected. How the line buttons indicate the line status The line buttons indicate the status of each line as follows. Light off The line is free. Light on The line is being used. Flashing A call is on hold on the handset or base unit, or the Answering System is answering a call (p. 65). Flashing rapidly A call is being received. Telephone System For assistance, please call: 1-800-211-PANA(7262) 37 Answering Calls When a call is received, the unit rings, “Incoming call” and the called line are displayed, and the Ringer/Message Alert indicator on the handset and the line button on the base unit flash rapidly. 2 calls can be handled simultaneously on separate telephone lines by the handset and the base unit. Handset LI NE1 Ringer/ 1 Press [C] or [s]. Message • The called line is automatically selected. Alert (To change the line selection, see page 62.) Indicator • You can also answer a call by pressing the LINE2 Soft Key called line soft key ( ) or ( ). ( • You can also answer a call by pressing any )LI NE1 Soft Key button except [d], [B] or [OFF]. ( [C] 2 To hang up, press [OFF] or place the )LI NE2 [OFF] handset on the base unit. [s] Auto Talk If the Auto Talk feature is turned on (p. 22), you can answer a call by simply lifting the handset off the base unit. Temporary ringer off While the handset is ringing, you can turn the ringer off temporarily by pressing [OFF]. The handset will ring again the next time a call is received on that line. Base Unit 1 Press [SP-PHONE]. LINE Buttons • The called line is automatically selected. (To change the line selection, see page 63.) • You can also answer a call by pressing the called line button. 2 Talk into the MIC. 3 To hang up, press [SP-PHONE]. [SP-PHONE] MIC • To transfer the call to another unit, see page 54. • To transfer the call to the Answering System to allow the caller to leave a message, see page 73. • If the ringer volume is turned off for the called line, the unit will not ring for the line (p. 23, 24). Using the Other Line During a Conversation When a call is being received on the other line during a conversation, you will hear 2 tones. The line button will flash rapidly on the base unit. You can answer the second call while holding the first call. You can also make a call without terminating the first call. You can turn off the 2 tones (Incoming call tone). See page 61. If you subscribe to Caller ID, the second caller’s information will be displayed when a call is being received on the other line (p. 40). 1 Ex. If you are using LINE 1 Press [HOLD/INTERCOM] 2 times to put the first call (LINE 1) on hold. • “ ” flashes on the display. 2 Press the other line soft key ( ) to make or answer a second call. • To hold the second call, press [HOLD/ INTERCOM] 2 times. Handset LI NE1 ROBINSON,TINA1-000-222-3333 -----Line2------ LINE1 LINE2 Ex. Receiving a second call LINE2 Talk Line2 Hold Line1 LINE1 CONF MUTE 3 To return to the first call (LINE 1), press the line soft key ( LINE1 ) for the first call (LINE 1). • The second call is terminated. Base Unit 1 Ex. If you are using LINE 1 Press [HOLD] to put the first call (LINE 1) on hold. • The LINE 1 button flashes. 2 Press the other line button (LINE 2) to make or answer a second call. • The LINE 2 button lights. • To hold the second call, press [HOLD]. 3 To return to the first call (LINE 1), press the line button for the first call (LINE 1). • The ...