Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
If the working telephone does not operate properly, contact your telephone company. Programmable settings Problem Cause/solution I cannot program items. L While another user is listening to messages or the answering system is answering a call, you cannot program items. Try again later. While programming, the handset starts to ring. L A call is being received. Answer the call and start again after hanging up. Battery recharge Problem Cause/solution I charged the battery fully, but 7 continues to flash, or 8is displayed. L Clean the charge contacts and charge again (page 15). L The battery may need to be replaced with a new one (page 14). The handset display is blank. L Confirm that the battery is properly installed. L Fully charge the battery (page 15). For assistance, please visit Useful Information Making/answering calls, intercom Problem Cause/solution Static is heard, sound cuts in and out. Interference from other electrical units. L Move the handset and the base unit away from other electrical appliances. L Move closer to the base unit. L Raise the base unit antennas. L Turn on the clarity booster feature (page 24). L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. The handset does not ring. L The ringer volume is turned off. Adjust it (page 36). The base unit does not ring. L The ringer volume is turned off. Adjust it (page 23). I cannot make a call. L The dialing mode may be set incorrectly. Change the setting (page 20). L The base unit or another handset is in use. Try again later. I cannot redial by pressing {REDIAL}. L If the last number dialed was more than 48 digits long, the number will not be redialed correctly. Dial the number manually. I cannot have a conversation using the headset. L Make sure that an optional headset is connected properly (page 49). L If “SP-phone” is displayed on the handset, press {C} to switch to the headset. I cannot make long distance calls. L Make sure that you have long distance service. I cannot page the handset. L The called handset is too far from the base unit. L The called handset is in use. Try again later. I cannot page the base unit. L The base unit is in use. Try again later. For assistance, please visit Useful Information Phonebook Problem Cause/solution Copying stopped with an item displayed.*1 L The destination handset may have lost communication with the base unit, or the destination unit user may have pressed {C} or {s}. The displayed phonebook item was not copied to the unit. Press {OFF}. Confirm that the destination unit is not in use and try again. *1 For models with 2 or more handsets included only (page 4). Caller ID Problem Cause/solution The handset does not L You have not subscribed to Caller ID service. Contact display the caller’s name your telephone company to subscribe. and/or phone number. L If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone jack, disconnect the unit from the equipment and plug the unit directly into the wall jack. L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The name display service may not be available in some areas. Contact your telephone company for details. L Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. L The caller requested not to send caller information (page 29). L If a call is being transferred to you, the caller information is not displayed. The handset or base unit L The handset or base unit’s ringer volume is turned off. does not announce the Adjust it (page 23, 36). displayed caller names.*1 L The Talking Caller ID feature is turned off. Turn it on (page 36). L The ring count for the answering system is set to “2” or “Toll saver”. Select a different setting (page 42). L If the base unit and another handset are having an intercom call, your handset does not announce caller information.*2 For assistance, please visit Useful Information Problem Cause/solution The caller list/incoming L The Caller ID number auto edit feature is turned off. phone numbers are not Turn it on and try again (page 35). edited automatically. L You need to call back the edited number to activate Caller ID number auto edit. I cannot dial the phone L The phone number you dialed might have an incorrectly number edited in the edited pattern (for example, the long distance “1” or the caller list. area code is missing). Edit the phone number with another pattern (page 31). The 2nd caller’s L In order to use Caller ID, Call Waiting, or Call Waiting information is not Caller ID (CWID), you must first contact your telephone displayed ...