Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically. This feature can be turned on or off (page 27). Note: LPhone numbers from the 4 most recently edited area codes are automatically edited. LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again. Storing caller information into the phonebook 1 {View CID} 2 {V}/{^}: Select the desired item. i {Select} LTo edit the number, press {Edit} repeatedly until the phone number is shown in the desired format. 3 {Save} LIf there is name information for the caller, skip to step 5. 4 Enter the name (see the character table, page 20). i {Next} i {Save} 5 {OFF} Erasing selected caller information 1 {View CID} 2 {V}/{^}: Select the desired item. 3 {Erase} i {Yes} i {OFF} Erasing all caller information 1 {View CID} 2 {All erase} i {Yes} For assistance, please visit Programming Programmable settings You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods: – scrolling through the display menus (page 25) – using the direct commands (page 27) LMainly the direct command method is used in these operating instructions. Programming by scrolling through the display menus 1 {MENU} 2 Press {V} or {^} to select the desired menu. i {Select} LIf there is a sub-menu(s), press {V} or {^} to select the desired item. i {Select} 3 Press {V} or {^} to select the desired setting. i {Save} LThis step may vary depending on the feature being programmed. 4 {OFF} Main menu Sub-menu 1 Sub-menu 2 Page Message play – – 32 V.M. access – – 37 Alarm – – 29 Ringer setting Ringer volume – – Ringer tone – – Ring color – – Set date & time Date and time*1 – 14 Time adjustment*1 – – Voice enhancer – – 18 Copy phonebook Copy 1 item – 21 Copy all items – 21 Talking CallerID – – 22 Customer support – – 29 For assistance, please visit Programming Main menu Sub-menu 1 Sub-menu 2 Page Initial setting Set answering Ring count*1 34 Recording time*1 35 Remote code*1 34 Voice Mail Store VM access#*1 36 VM tone detect*1 36 Message alert – 35, 37 LCD contrast – – Key tone – – Auto talk – 16 Caller ID edit – 24 Set tel line Set dial mode*1 14 Set flash time*1 17 Set line mode*1 – Set base unit Ringer tone*1 – Talking CallerID*1 22 Registration HS registration 39 Deregistration 39 Change language Display 13 Voice prompt*1 13 *1 If you program these settings using one of the handsets, you do not need to program the same item using another handset. For assistance, please visit Programming Programming using the direct commands 1 {MENU} 2 Enter the desired feature code. 3 Enter the desired setting code. i {Save} LThis step may vary depending on the feature being programmed. 4 {OFF} Note: LIn the following table, < > indicates the default setting. LIf you make a mistake or enter the wrong code, press {OFF}, then start again from step 1. Feature Feature code Setting code System setting*1 Page Alarm {8} {1}: Once {0}: