Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Important: L Charge the battery fully. L Before registering, make sure the base unit and the other handsets are not being used. L Have the handset and base unit near each other when registering the handset. 1 Base unit: Press and hold {INTERCOM} until the CHARGE indicator flashes. L After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 2 Handset: Press {OK} (right soft key), then wait until the handset beeps. L Registration is complete. L The handset’s extension number (! to )) will be displayed. Note: L To cancel the handset registration, please see your base unit’s operating instructions. Changing the display language 1 Press {MENU}, then press {#} {1}{1} {0}. 2 Press {1} to select English. Press {2} to select Spanish. 3 Press {SAVE} or {GUARDAR}, then press {OFF}. Belt clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip While pressing the top of the clip (1), pull the right edge in the direction of the arrow (2). 1 2 For assistance, please visit Preparation Headset (optional) Connecting an optional headset to the handset allows hands-free phone conversations. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KXTCA91, KX-TCA92, or KX-TCA98 headset. See page 3 for ordering information. To connect an optional headset to the handset L Model shown is KX-TCA86. Headset jack Wall mounting The charger can be wall mounted, as shown below. 1 Connect the AC adaptor. 2 Drive the screws (not included) into the wall using the wall mount template (see below). 3 Mount the charger (1), then slide it down (2) and to the right (3) until it is secure. 12325.4 mm Screws To power outlet (1") Wall mount template 25.4 mm (1") For assistance, please visit Controls and Operation Controls Handset ABCDEFGH I J K L M N O P A Speaker B Soft keys C Headset jack/Audio jack D {C} (TALK) E Navigator key F {s} (SP-PHONE) G {*} (TONE) H {REDIAL}{PAUSE} I Ringer indicator Message indicator J Receiver K Display L {OFF} M {CLEAR}{MUTE} N {INTERCOM}{HOLD} O Microphone P Charge contacts Charger A B A Charge contacts B CHARGE indicator For assistance, please visit Controls and Operation Operation After registering this handset, refer to the operating instructions included with your KX-TG5561, KX-TG5566, KX-TG5571, KX-TG5576, or KX-TG5583 for details about operating the handset. Please note that the KX-TGA551 has certain features which differ from the handset included with your base unit. Read page 8 and page 9 beforehand. Using the navigator key This handset features a navigator key. The navigator key works the same as the joystick found on the handset included with your KX-TG5561, KX-TG5566, KXTG5571, or KX-TG5576. Pressing each of the 4 areas on the navigator key indicated by the arrows (^, V, <, and >) performs the same operation as pushing the joystick up, down, left, and right. KX-TGA551/ KX-TG5561/ KX-TG5583 KX-TG5566/ navigator key KX-TG5571/ KX-TG5576 joystick Use the navigator key as follows. L To select the receiver or speaker volume, press {^} and {V}. L To scroll to a menu item shown on the display, press {^}, {V}, {<}, and {>}. L To select a menu item, you can press {>}. L To go back to the previous menu, you can press {<}. L To move the cursor to right and left, press {<} and {>}. L To scroll through the caller list and phonebook, press {V} and {^}. L For KX-TG5571, KX-TG5576, and KXTG5583 users only: To repeat and skip messages, press {<} and {>}. Using the soft keys The handset features 3 soft keys. By pressing a soft key, you can select the function displayed directly above it. L The functions displayed will vary depending on how you are using the handset and the base unit the handset is registered to. L When a function does not appear above a soft key, the soft key has no function. Note: L When in standby mode, pressing {MENU} reveals the handset’s main menu. From here you can access various features and settings. For assistance, please visit Controls and Operation Guide to programming Available programming functions vary depending on the base unit the handset is registered to. Please read the operating instructions included with your base unit. 1 Press {MENU} (middle soft key). 2 Press {V}, {^}, {<}, and {>} to scroll through the menu. 3 Press {SELECT} when the desired menu item is selected. 4 Press {V} and {^} to scroll through the menu. 5 Press {SELECT} or {>} when the desired menu item or setting is displayed. 6 Press {SAVE}, then press {OFF}. Differences between the handsets included with the KX-TG5561, KXTG5566, KX-TG5571, KX-TG5576, and KX-TG5583 The KX-TGA551 has certain features which differ from the handset included with your base unit, as indicated in the table below. Feature KX-TGA551 KX-TG5583 KX-TG5561 KX-...