Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Adjust it (page 41, 64). I cannot make a call. L The dialing mode may be set incorrectly. Change the setting (page 20). L The base unit (including answering system) or another handset is in use. Try again later. I cannot redial by pressing {REDIAL}. L If the last number dialed was more than 48 digits long, the number will not be redialed correctly. Dial the number manually. I cannot have a conversation using the headset. L Make sure that an optional headset is connected properly (page 71). L If “SP-phone” is displayed on the handset, press {C} to switch to the headset. L Your optional Bluetooth headset is not registered. Register it (page 70). I cannot make long distance calls. L Make sure that you have long distance service. I cannot page the handset or base unit. L The called handset is too far from the base unit. L The called unit is in use. Try again later. I cannot turn the clarity booster on. L The resources available for wireless communication (making or answering calls with another handset, etc.) are limited. Wait for the other user to end the operation and try again. The interrupt tones sound while I am on an outside call or on an intercom call or monitoring a room. L A call is being received. Press {OFF} to end the call or stop monitoring, then answer the call. For assistance, please visit Useful Information Phonebook Problem Cause/solution Copying stopped with an item displayed. L The destination handset may have lost communication with the base unit, or the destination unit user may have pressed {C} or {s} on the handset or {SP-PHONE} on the base unit. The displayed phonebook item was not copied to the unit. Press {OFF} on the handset or {STOP} on the base unit. Confirm that the destination unit is not in use and try again. Caller ID Problem Cause/solution The handset or base unit L You have not subscribed to Caller ID service. Contact does not display the your telephone service provider to subscribe. caller’s name and/or L If your base unit is connected to any additional phone number. telephone equipment such as a Caller ID box or cordless telephone jack, disconnect the base unit from the equipment and plug the base unit directly into the wall jack. L If your base unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The name display service may not be available in some areas. Contact your telephone service provider for details. L Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. L The caller requested not to send caller information (page 31). L If a call is being transferred to you, the caller information is not displayed. The handset does not L The handset’s ringer volume is turned off. Adjust it announce the displayed (page 41). caller names. L The Talking Caller ID feature is turned off. Turn it on (page 45). L The ring count for the answering system is set to “2” or “Toll saver”. Select a different setting (page 57). The caller list/incoming L The Caller ID number auto edit feature is turned off. phone numbers are not Turn it on and try again (page 45). edited automatically. L You need to call back the edited number to activate Caller ID number auto edit. For assistance, please visit Useful Information Problem Cause/solution I cannot dial the phone number edited in the caller list. L The phone number you dialed might have an incorrectly edited pattern (for example, the long distance “1” or the area code is missing). Edit the phone number with another pattern (page 33). The 2nd caller’s information is not displayed during an outside call. L In order to use Caller ID, Call Waiting, or Call Waiting Caller ID (CWID), you must first contact your telephone service provider and subscribe to the desired service. After subscribing, you may need to contact your telephone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). Answering system Problem Cause/solution I cannot listen to messages from a remote location. L A touch tone phone is required for remote operation. L Enter the remote code correctly (page 55). L The answering system is off. Turn it on (page 56). The unit does not record L The answering system is not turned on for the line you new messages. wish to record messages from. Select the desired line or both lines by pressing {LINE SELECT} repeatedly, then turn the answering system on (page 50, 56). L The recording time is set to “Greeting only”. Select a different setting (page 58). L The message memory is full. Erase unnecessary messages (page 52). L The answering system is activated for both lines, and the 1st caller is leaving a voice message. The 2nd caller cannot leave a message, but the caller information will be stored (page ...