Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Mute the microphone 1 Press during a call. »»The handset displays [Mute on]. »»The caller cannot hear you, but you can still hear his voice. 2 Press again to unmute the microphone. »»You can now communicate with the caller. Turn the speaker on or off Press . Make a second call Note ••This service is network dependent. 1 Press during a call. »»The first call is put on hold. 2 Dial the second number. »»The number displayed on the screen is dialed out. Answer a second call Note ••This service is network dependent. When there is a periodical beep to notify you of an incoming call, you can answer the call in these ways: 1 Press and to answer the call. »»The first call is put on hold, and you are now connected to the second call. 2 Press and to end the current call and answer the first call. Switch between two calls Note ••This service is network dependent. Press and . »»The current call is put on hold, and you are now connected to the other call. Make a conference call with the external callers Note ••This service is network and country dependent. Check with the service provider for additional charges. When you are connected to two calls, press , then . »»The two calls are combined and a conference call is established. EN 5 Intercom and conference calls An intercom call is a call to another handset that shares the same base station. A conference call involves a conversation between you, another handset user and the outside callers. Make sure that all the handsets registered to the base station are Philips D40 models in order to have this feature functioning properly. Make a call to another handset Note ••If the base station only has 2 registered handsets, press and hold to make a call to another handset. 1 Press and hold . »»The handsets available for intercom are displayed. 2 Select a handset number, then press MENU/OK to confirm. »»The selected handset rings. 3 Press on the selected handset. »»The intercom is established. 4 Press REDIAL/C or to cancel or end the intercom call. While you are on the phone You can go from one handset to another during a call: 1 Press and hold . »»The current caller is put on hold. 2 Select a handset number, then press MENU/OK to confirm. »»Wait for the other side to answer your call. Switch between calls Press and hold to switch between the outside call and the intercom call. Transfer a call Note ••If the base station only has 2 registered handsets, press and hold to transfer a call to another handset. 1 Press and hold during a call. »»The handsets available for intercom are displayed. 2 Select a handset number, then press MENU/OK to confirm. 3 Press when the other side answers your call. »»The call is now transferred to the selected handset. Make a conference call A 3-way conference call is between you, another handset user and the outside callers. It requires two handsets to share the same base station. During an external call 1 Press and hold to initiate an internal call. »»The external caller is put on hold. »»For multi-handset versions, the handsets available for intercom are displayed, then go to step 2. »»For two-handset versions, the other handset rings, then go to step 3. 2 Select or enter a handset number, then press MENU/OK to confirm. »»The selected handset rings. English EN 3 Press on the selected handset. »»The intercom is established. 4 Select [Conference]. »»You are now in a 3-way conference call with an external call and a selected handset. 5 Press to end the conference call. Note ••Press to join an ongoing conference with another handset if [Services] > [Conference] is set to [Auto]. During the conference call 1 Press and hold to put the external call on hold and go back to the internal call. »»The external call is put on hold. 2 Press and hold again to establish the conference call again. Note ••If a handset hangs up during the conference call, the other handset remains connected to the external call. EN 6 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers 1 Press once or several times on the alphanumeric key to enter the selected character. 2 Press REDIAL/C to delete a character. Press and hold REDIAL/C to delete all characters. Press and to move the cursor left and right. 3 Press to add a space. Note ••For information on key mapping of characters and numbers, see the chapter 'Appendix'. Switch between uppercase and lowercase By default, the first letter of each word in a sentence is uppercase and the rest is lowercase. Press and hold to switch between the uppercase and lowercase letters. English EN 7 Phonebook Make sure that all the handsets registered to the base station are Philips D40 models in order to have this feature functioning properly. For more information, see the base station's user manual. EN 8 Call log Make sure that all the handsets registered to the base station are Philips D40 models in order to have this feature functioning properly. For more information, see the ...