Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.52 mb Nombre del archivo: Idioma del manual:

j • Press and hold to make an intercom call (for multi-handset version only). • Set the dial mode (pulse mode or temporary tone mode). k • Scroll down on the menu. • Decrease the earpiece/speaker volume. • Access the call log. l • Make and receive calls. • Recall key (This function is network dependent.) English EN m MENU/OK • Access the main menu. • Confirm selection. • Enter the options menu. • Select the function displayed on the handset screen directly above the key. n Loudspeaker o Battery door Overview of the base station D400 a a • Press to find handsets. • Press and hold to enter the registration mode. D405 cdbaefg a Speaker (back of the base station) b Turn the answering machine on or off. c • Delete the current playback message. • Press and hold to delete all old messages. d / Decrease/increase the speaker volume. e / Skip backward/forward during playback. f • Play messages. • Stop messages playback. g • Press to find handsets. • Press and hold to enter the registration mode. Display icons In standby mode, the icons shown on the main screen tell you what features are available on your handset. Icon Descriptions When the handset is off the base station/charger, the bars indicate the battery level (from full to low). When the handset is on the base station/charger, the bars keep scrolling until charging is complete. The empty battery icon flashes and you hear an alert tone. The battery is low and needs recharging. It displays the connection status between the handset and base station. The more bars are shown, the better the signal strength is. It remains steadily on when browsing answered incoming calls in the call log. EN It indicates an outgoing call in the redial list. It flashes when there is a new missed call or when browsing the unread missed calls in call log. It remains steadily on when browsing the read missed calls in call log. It flashes when receiving incoming call. It remains steadily on when you are in a call. The speaker is on. The ringer is off. The silent mode is set and within active period (the phone does not ring). Answering machine (D405 only): it flashes when there is a new message or when the memory is full. It displays when the telephone answering machine is turned on. It flashes when there is a new voice message. It remains steadily on when the voice messages are already viewed in the call log. The icon is not shown when there is no voice message. The silent mode is set, but is outside of active period. The alarm is activated. / It is displayed when you scroll up / down a list or increase / decrease the volume. ECO The ECO mode is activated. ECO+ The ECO+ mode is activated. English EN 3 Get started Caution ••Make sure that you have read the safety instructions in the 'Important safety instructions' section before you connect and install your handset. Connect the base station Warning ••Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the phone. ••Use only the supplied power adapter to charge the batteries. Note ••If you subscribe to the digital subscriber line (DSL) high speed internet service through your telephone line, ensure you install a DSL filter between the telephone line cord and the power socket. The filter prevents noise and caller ID problems caused by the DSL interference. For more information on the DSL filters, contact your DSL service provider. ••The type plate is located on the bottom of the base station. 1 Connect each end of the power adapter to: • the DC input jack at the back of the base station; • the power socket on the wall. 2 Connect each end of the line cord to: • the telephone socket at the back of the base station; • the telephone socket on the wall. 3 Connect each end of the power adapter to (for multi handset version only): • the DC input jack at the bottom of the extra handset charger. • the power socket on the wall. EN Insert the supplied batteries 123 Caution ••Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. ••Use only the supplied batteries. ••Risk of decreased battery life! Never mix different brands or types of batteries. Note ••Charge the batteries for 8 hours before first use. ••If the handset becomes warm when the batteries are charging, it is normal. Warning ••Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product. Configure your phone (country dependent) 1 When using your phone for the first time, you see a welcome message. 2 Press MENU/OK. Set the country/language Select your country/language, then press MENU/OK to confirm. »»The country/language setting is saved. Note ••The country/language setting option is country dependent. If no welcome message is displayed, it means the country/language setting is preset for your country. Then you can set the date and time. To reset the language, see the following steps. 1 Select [Phone setup] > [Language], th...

Descargar ahora

Introduzca dos números de la imagen: