Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 2.83 mb Nombre del archivo: Idioma del manual:

Setting the dial mode This option sets the way your telephone sends numbers to the telephone line. You can choose one of two dial modes (TONE or PULSE). 1 2 3 4 Press R, then press + to display SETUP. Press o. Press -until you reach DIAL MODE, then press o. Press +or -to select TONEor PULSE, then press o. Your handset beeps to indicate that the dial mode has been changed. Press R to leave menu mode. Tip You can change the dial mode from PULSE to TONE during a call by pressing *. The dial mode will return to PULSE after the call. Note: (UK only) Although this equipment can use either loop disconnect (PULSE) or DTMF signalling (TONE), only the performance of the DTMF signalling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use DTMF signalling of access to public or private signalling emergency services. DTMF signalling also provides faster call set up. Personalising your telephone 20 Selecting the ringer melody and volume You can change the ringer melody and volume of both the handset and the base station. There are three possible ringer melodies (MELODY 1, MELODY 2or MELODY 3) and three volume options (LOUD, SOFTor OFF). Handset ringer 1 Press R, then press -until you reach RINGERS. Press o. 2 Press -until you reach HANDSET. Press o. 3 Press +or -to scroll through the melody options. The displayed melody is played on the handset ringer until you scroll to another melody, or you leave menu mode. 4 Press o to choose a melody. A beep indicates that the melody has been selected. 5 Press +or -to scroll through the volume options. Press o to choose an option. A beep indicates that the volume option has been selected. 6 Press R to leave menu mode. Base station ringer To change the ringer melody and volume of the base station, proceed as for the handset. In step2 press - until you reach BASE. Using the batter y saver Use the battery saver if you want to use the handset away from the base station for a long period of time. Switching on the batter y saver 1 Press and hold the o key for 2 seconds. Your handset will beep and switch to battery saver mode. Note: In batter y saver mode the handset will not ring. However, if someone calls, the base station will ring. Switching off the batter y saver • The battery saver will switch off as soon as you press a key. • The battery saver will also switch off if you place your handset on the base station. The handset will start to recharge if necessary. Personalising your telephone 21 Making a call using the phone book 1 Press P . The first name in the phone book is displayed. If the phone book is empty, BOOK EMPTY will be displayed. 2 Press + or -to scroll through the list of names in your phone book. To see the number associated with the displayed name, press o. The number will be displayed and will scroll if it is longer than 10 digits. To go back to the name, press o again. 3 Press t to dial the name or number displayed. To quit the phone book without dialling, press P again. Removing a name and number from your phone book 1 Press R, , then press o. 2 Press -until you reach REMOVE, then press o. If the phone book is empty, BOOK EMPTY is displayed. 3 Press + or - to select a name, then press o to remove that name. Both the name and the number are removed from your phone book. The handset beeps and REMOVED is displayed. 4 Press R to leave menu mode. The emergency number (Onis) Storing an emergency number - SOS You can dial an emergency number automatically by pressing the S key. You need to enter your emergency number before you can use the S key. This number can be changed later if required. 1 Press R, then press - until you reach SOS. Press o. If there is no emergency number stored, the display will show NUMBER?, and you can enter the new number directly, as described below. If an emergency number is already stored, the display will show this number. You have to delete this number using + before you can enter a new one. 2 Enter the number using the handset keypad (max. 23 digits). If you want your Onis to pause while dialling the number (for example, after an international dialling code prefix), press the Bkey to insert a pause. A dash will appear between the digits on the display to show where the pause will be inserted. 3 Press o to store the new emergency number. A beep confirms that the emergency number has been saved. 4 Press R to leave menu mode. Personalising your telephone 22 Calling the emergency number To call an emergency number, press S and the number is dialled automatically. Note: 1. The S key works only if your handset is charged and your base station is correctly plugged in. 2. If you have not entered an emergency number, pressing S will be ineffective as there is no pre-programmed number. 3. On your Onis Memo, there is no S key. The only way to store an emergency number is to store it in your phonebook. To call this emergency number, follow the procedure “Making a call using the p...

Descargar ahora

Introduzca dos números de la imagen: