Votos - 3, Puntuación media: 4.3 ( )

Fabricar: A & T International Tamaño del archivo: 1.19 mb Nombre del archivo: E5813B_qsg_I5.pdf Idioma del manual:

For best performance, place the handset in the telephone base or charger to charge for 16 hours before use. You can keep the battery charged by returning the handset to the telephone base or charger after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about five hours, and the standby time is approximately six days. Actual battery life depends on usage conditions and age of battery. 1. Insert the plug as indicated. Be sure to securely insert the plug, making sure that it matches the color-coded label inside the battery compartment. 2. Place the battery and wires inside the compartment. 3. Slide the battery compartment cover up until it clicks. NOTE: Under normal conditions, the battery should last around one year. This may vary depending on usage. /l\Caution: Use only the supplied rechargeable battery, replacement battery 2422 (SKU 23402, part number 89-0047-00-00) or equivalent. To order a replacement battery, visit our website at or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat surface or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location. Avoid placing the telephone base too close to: • Communication devices such as: personal computers, computer routers, television sets, VCRs, wireless routers (wireless broadband, wi-fi, or 802.11) or other cordless telephones. • Excessive heat sources. • Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. • Excessive dust sources such as a workshop or garage. • Excessive moisture. • Extremely low temperature. • Mechanical vibration or shock such as on top of the washing machine or work bench. a L. 1 Telephone base installation 1. Plug the small end of the larger power adapter into the power jack at the bottom of the telephone base. DSL filter (Optional for DSL users, see number four in the note section, below.) 5. Plug the other end of the telephone line cord into a telephone jack. Telephone line cord 2. Plug the end of the telephone line cord into the telephone jack at the bottom of the telephone base. 3. Route cords through slots. 4. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch. 6. Plug the small end of the smaller power adapter into the jack on the underside of the charger, then route the cord through the slot as shown. 7. Plug the large end of the smaller power adapter into an electrical outlet not controlled by a wall switch. 8. You may be able to make or receive short calls. For best performance, place the handset in the telephone base to charge for at least 16 hours before first use. ^ NOTES: 1. Use only the power adapt...

Descargar ahora

Introduzca dos números de la imagen: