6. Press
During a call: Press
Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery. IMPORTANT INFORMATION: Use only the supplied rechargeable battery or replacement battery (model BT166342). To order, visit our website at or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Battery installation and charging Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place t
In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to: Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing machine or work bench. Telephone bas
REPEAT After the answering system plays the day and time the current message was received, press to repeat the message currently playing. While the answering system is playing the day and time the current message was received, press to listen to the previous message. SKIP Press to skip a message. /ANS ON Press to turn the built-in answering system on or off. SLOW Press to slow message playback. VOLUME While the telephone is not in use, press to adjust the telephone base ringer volume. During cal
Battery installation and charging Battery installation Install the battery as shown below. Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light is o
While entering numbers, press and hold to insert a dialing pause. PHONE/FLASH Press to make or answer a call. During a call, press to answer an incoming call when you receive a call waiting alert. 1 While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory. 0 While entering names in the directory, press to add a space. MUTE/REMOVE During a call, press to mute the microphone. While predialing, press
If the answering machine memory is full, the Handset will display TAM FULL alternately with the handset's name or time, depending on the handset standby display mode set (see section 7.3.7), and you will have to delete some messages before any new ones can be recorded. Some answering machine functions can be operated from the base, including playing messages and turning the answering machine on or off. See section "3.2 Base Station with Telephone Answering Machine (TAM) Control" for further det
TAM then press ^ using PHONE/ OK button Or stop playback by pressing HANG UP/ C button. Press and hold the HANG UP/ C button to go back to standby mode 5 http:/ / binatoneonline. com/ 31 4 • The display showsPLAY and the machine tells y ou how many new messages you have. ** You can use the Q uick Ref list on page 26. Color profile: Generic CMYK printer profile Composite Default screen Answering machine-Basis use 1 2 3 ^ ^^ Call Screening ^^ 45 ^^ . . While a caller is leaving a message, you can
1. 4 USING YOUR PHONE Using a cordless handset: 4.1 Make a Call 4.1.1 Preparatory Dialling Enter the phone number and press