Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Do not exceed 70 psi. c) Reduce the amount of paint flowing into the sprayer by turning the Fluid Valve Control Knob clockwise d) Clean the Air Nozzle using solvent Not enough air pressure to spray the paint a) Air Needle partially closed b) Dried material in Air Ball Valve or Air Nozzle c) Insufficient air supply a) Open Air Ball Valve by turning the air Valve Control Knob counterclockwise b) Clean the dirty part in solvent c) Adjust the regulator in your system, or increase air pressure. DO NOT INCREASE PRESSURE BEYOND 50 psi MAX. Inadequate coverage. Paint “fogs” on the workpiece Air pressure too high for the viscosity of the paint mixture Reduce the air pressure or add more paint to the mixture to increase viscosity Material leaking from Paint Cup Nipple a) Dried material is in threads b) Nipple is not tight a) Clean threads using solvent b) Tighten nipple Paint leaks from nozzle when trigger is operated a) Worn Fluid Needle b) Dried paint in Air Nozzle c) Loose or worn Needle Packing a) Replace Fluid Needle b) Clean Air Nozzle in solvent c) Tighten or replace Needle Packing SKU 92841 For technical questions, please call 1-800-444-3353. Page 9 Parts List Part description 1 Nozzle Lock Ring 2 Air Nozzle 3 Nozzle Inner Ring 4 Spray Nozzle 5 Nozzle Washer 6 Housing 7 Trigger Pin Snap Ring 8 Trigger Pin 9 Trigger Lock 10 Air Control Seal 11 Air Control Needle Valve 12 Air Control Knob 13 Air Control Valve Seal 14 Air Control Valve Seat 15 Air Control Valve Seal 16 Air Control Valve Body 17 Air Control Seal Ring 18 Air Control Valve Spring Part description 19 Air Control Lock Nut 20 Fluid Needle Valve 21 Fluid Needle Valve Mount 22 Fluid Needle Valve Spring 23 Fluid Needle Valve Adjuster 24 Fluid Control Knob 25 Nozzle Packing Fitting 26 Trigger 27 Spray Control Knob 28 Spray Control Seat 29 Spray Control Pin 30 Spray Control Spring 31 Spray Control Cap 32 Reservoir Cap 33 Reservoir Seal 34 Siphon Tube 35 Paint Cup 36 Air Intake Nipple PLeaSe read the FOLLOWinG careFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-800-444-3353. SKU 92841 assembly drawing nOte: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 92841 For technical questions, please call 1-800-444-3353. Page 11 90 day Warranty 90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 Page 12 For technical questions, please call 1-800-444-3353. SKU 92841 ...
Otros modelos de este manual:Armas - CENTRAL PNEUMATIC 92841 (361.11 kb)