Votos - 4, Puntuación media: 4.8
(
)
)
|
Resumen del manual
shutting off air valves. 3. Keep WorK area clean. 7. do not force tool. it will do Cluttered areas and benches invite the job better and safer at the rate accidents. for which it was designed. 4. do not use in dangerous 8. use the right tool. do not environment. do not use pneu-force tool or attachment to do a job matic tools in damp or wet loca-for which it was not designed. tions, or where any flammable or 9. do not use under the noxious fumes may exist. Keep influence of drugs or work area well lighted. alcohol. -4- Model h7668 spray gun w/pressure Cup safety instructions for pneumatic tools 10. use proper air hose for the 17. disconnect tools before sertool. Make sure your air hose is in vicing, changing accessories, or good condition and is long enough to moving to another location. reach your work without stretching. 18. do not overreach. Keep 11. Wear proper apparel. do not proper footing/balance at all times. wear loose clothing, gloves, neck-19. use the recommended ties, rings, bracelets, or other jew-accessories. Consult owner’s elry which may get caught in moving manual for recommended accesparts. non-slip footwear is recom-sories. the use of improper accesmended. Wear a protective hair cov-sories may cause risk of injury. ering to contain long hair. 20. checK for damaged parts 12. alWays use safety glasses. before using. Check for bind- also use a face or dust mask if cut-ing and alignment of parts, broken ting operation is dusty. Everyday parts, part mounting, loose bolts, eyeglasses only have impact resis-and any other conditions that maytant lenses, they are not safety affect machine operation. repair or glasses. replace damaged parts. 13. Wear approved hearing 21. never leave unattended protection. air escaping from tool connected to air. pneumatic tools can exceed safe disconnect the air hose and do not exposure limits and may cause leave tool until it is relieved of any hearing damage with prolonged built up pressure. exposure. 22. never alloW untrained 14. secure WorK. use clamps or a users to use this tool vise to hold work when practical. it is While unsupervised. safer than using your hand and frees 23. if you are unsure of the both hands to operate tool. intended operation, stop 15. maintain tools With care. using tool. seek formal training Keep tools lubricated and clean or research books or magazines for best and safest performance. that specialize in pneumatic tools. Follow instructions for lubricating 24. be aWare of hose location and changing accessories. When using pneumatic 16. reduce the risK of tools. hoses can easily become unintentional starting. do a tripping hazard when laid across not carry tool with hand on trig-the floor or spread out in a disorgager and always disconnect from air nized fashion. when not in use. Model h7668 spray gun w/pressure Cup -5 additional safety instructions for spray guns 1. read this manual. this manual 9. inappropriate use. do not contains proper operating instruc-point or shoot spray gun directly tions for this spray gun. at yourself or another person or animals. do not attempt to use the 2. read material labels spray gun for any other use than it and material safety data was intended. sheets (msds). read and know all the instructions on the packag-10. storage. thoroughly clean and ing label and the Msds before dry spray gun before storage. store opening the package. this informa-in an approved cabinet. tion could save your life. 11. solvents. always store solvents 3. alWays Wear a niosh and shop towels soaked in solvent approved respirator in approved containers. When spraying or WorKing around finishing materi-12. eye protection. Wear eye proals. tection whenever spraying or cleaning. solvents and chemicals can 4. fire eXtinguishers. always cause serious eye injury, which could lead to blindness. have a fully charged multi class or class B fire extinguisher in the 13. operating pressure. do immediate area. not exceed the recommended inlet air pressure. Excessive pres 5. flammable material. nEVEr sure could cause the spray gun to spray near open flame or where burst or cause other internal equip- any spark could occur. ment damage. 6. fresh air. always provide ade14. local laWs. Consult local quate exhaust to keep area free of authorities regarding V.o.C. exhaust built up vapors, nEVEr spray in an and waste disposal requirements. enclosed space. 7. disconnect compressed 15. depressurize tanK. Make air. always disconnect the spray sure tank is fully depressurized gun from compressed air before before removing lid. cleaning, changing attachments or when performing maintenance of 16. hoses. Be aware of hoses to any kind on this tool. avoid tripping. 8. protective clothing. protect exposed skin from overspray by wearing a protective suit or other approved garment. -6- Model h7668 spray gun w/pressure Cup Model H7668 Spray Gun w/Pressure Cup -7- SECTION 2: INTRODUCTION If you have any comments regarding this manual, please write to us at the fol...