Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
#PC8208 PRINTED IN TAIWAN SECTION 1: SAFETY Indicates a potentially hazardous situation which, if not avoided, MAYresult in minor or moderate injury. It may also be used to alert against unsafe practices. Indicates a potentially hazardous situation which, if not avoided, COULDresult in death or serious injury. This symbol is used to alert the user to useful infor- mation about proper operation of the equipment. For Your Own Safety Read Instruction Manual Before Operating This EquipmentThe purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. NOTICEIndicates an imminently hazardous situation which, if not avoided, WILLresult in death or serious injury. Safety Instructions For Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN 5. KEEP CHILDREN AND VISITORS PLACE and in working order. AWAY. All children and visitors should be kept at a safe distance WRENCHES. Form habit of check 2. REMOVE ADJUSTING KEYS AND from work area. ing to see that keys and adjusting 6. MAKE WORKSHOP CHILD wrenches are removed from tool PROOF by locking your shop and before operation. shutting off air valves. 3. KEEP WORK AREA CLEAN. 7. DO NOT FORCE TOOL. It will do Cluttered areas and benches invite the job better and safer at the rate accidents. for which it was designed. 4. DO NOT USE IN DANGEROUS 8. USE THE RIGHT TOOL. Do not ENVIRONMENT. Do not use pneu-force tool or attachment to do a job matic tools in damp or wet loca-for which it was not designed. tions, or where any flammable or 9. DO NOT USE UNDER THE noxious fumes may exist. Keep INFLUENCE OF DRUGS OR work area well lighted. ALCOHOL. -2- Model G5353 Spray Gun Safety Instructions For Pneumatic Tools 10. USE PROPER AIR HOSE for the 17. DISCONNECT TOOLS before sertool. Make sure your air hose is in vicing and changing accessories. good condition and is long enough to 18. DO NOT OVERREACH. Keep reach your work without stretching. proper footing/balance at all times. 11. WEAR PROPER APPAREL. Do not 19. USE THE RECOMMENDED wear loose clothing, gloves, neck-ACCESSORIES. Consult owner’s ties, rings, bracelets, or other jew-manual for recommended acceselry which may get caught in moving sories. The use of improper accesparts. Non-slip footwear is recom-sories may cause risk of injury. mended. Wear a protective hair cov20. CHECK FOR DAMAGED PARTS ering to contain long hair. BEFORE USING. Check for bind 12. ALWAYS USE SAFETY GLASSES. ing and alignment of parts, broken Also use a face or dust mask if cut-parts, part mounting, loose bolts, ting operation is dusty. Everyday and any other conditions that may eyeglasses only have impact resis-affect machine operation. Repair or tant lenses, they are NOT safety replace damaged parts. glasses. 21. NEVER LEAVE UNATTENDED 13. WEAR APPROVED HEARING TOOL CONNECTED TO AIR. PROTECTION. Air escaping from Disconnect the air hose and do not pneumatic tools can exceed safe leave tool until it is relieved of any exposure limits and may cause built up pressure. hearing damage with prolonged 22. NEVER ALLOW UNTRAINED exposure. USERS TO USE THIS TOOL 14. SECURE WORK. Use clamps or a WHILE UNSUPERVISED. vise to hold work when practical. It is 23. IF YOU ARE UNSURE OF THE safer than using your hand and frees INTENDED OPERATION, STOP both hands to operate tool. USING TOOL. Seek formal training 15. MAINTAIN TOOLS WITH CARE. or research books or magazines Keep tools lubricated and clean that specialize in pneumatic tools. for best and safest performance. 24. BE AWARE OF HOSE LOCATION Follow instructions for lubricating WHEN USING PNEUMATIC and changing accessories. TOOLS. Hoses can easily become 16. REDUCE THE RISK OF a tripping hazard when laid across UNINTENTIONAL STARTING. Do the floor or spread out in a disorganot carry tool with hand on trig-nized fashion. ger and always disconnect from air when not in use. Model G5353 Spray Gun -3 Additional Safety Instructions for Spray Guns 1. READ THIS MANUAL. This manual 8. PROTECTIVE CLOTHING. Protect contains proper operating instruc-exposed skin from overspray by tions for this spray gun. wearing a protective suit or other approved garment. 2. READ MATERIAL LABELS and MATERIAL SAFETY DATA 9. INAPPROPRIATE USE. DO NOT SHEETS (MSDS). Read and know point or shoot spray gun directly all the instructions on the packag-at yourself or another person or ing label and the MSDS before animals. Do not attempt to use the opening the package. This informa-spray gun for any other use than it tion could save your life. was intended. 3. RESPIRATORY PROTECTION. 10. STORAGE. Thoroughly clean and Always wear a NIOSH approved dry spray gun before storage. Store respirator when spraying or work-in ...