Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
30° Double Spray Head (54): Designed for wider spray areas on short crops and the spraying of herbicides and pesticides. Move in a parallel manner on one side while spraying. B. Fan Style Spray Head (55): Sprays evenly. Suitable for spray ing herbicides on short stalked crops. Always spray in the same direction as the wind. C. Adjustable Spray Head (56): Designed for spraying tall crops and fruit trees and the spraying of pesticides. However, the adjustable spray head may result in significant overspray of pesticides. D. Conical Spray Head (58): May be used for spraying herbi- cides and pesticides. Spray in the same direction as the wind and on one side, multi-row, cross spraying. To attach a Spray Head (54, 55, 56, 2. 58), check to make sure the Spray Head Sealing Ring (50) is properly seated in the Spray Head Nut (53). Screw the desired Spray Head into 3. the Spray Head Nut. To Fill The Container: CAUTION!4. Always wear eye, breathing, and skin protection. Wear ANSI- approved safety impact goggles, an ANSI approved respirator, latex gloves, and proper safety clothing when using this product. Prior to filling the Tank (16) of the 5. Sprayer with liquid, remove the Tank Cap (23) and check to make sure the Filter (21) is clear of dirt and debris. If necessary, remove the Filter and thoroughly clean. Insert the Filter back into the opening 6. of the Tank. Fill the Tank with up to 4 gallons of liquid. CAUTION! Do not overfill the Tank. Replace Tank Cap. NOTE:7. The Sprayer is heavy when completely filled with liquid. Always get assistance when strapping the Sprayer onto your body. If necessary, adjust the Back Belt (43) for comfort. Always make sure other adults, 8. children, and animals do not have access to the area(s) in which you intend to chemically treat. Grip Handle (30) of the Spray Gun 9. assembly firmly with your right hand. With your left hand, pump Arm (11) to 10. build up sufficient pressure in Sprayer system. Once the system is pressurized (as indicated by an increased tension on the Operation Arm), you may stop pumping Arm. Point the Spray Head (54, 55, 56, 11. 58) of the Spray Gun assembly toward the area to be sprayed. Then, squeeze the Lever (41) on the Spray Gun assembly to begin spraying. As you spray, the system will begin 12. to depressurize. When distance of spray diminishes you will need to stop spraying momentarily. Resume pumping Arm (11) to re-pressurize the system before spraying again. To refill Tank, squeeze the Lever to 13. completely depressurize the system. Remove Tank Cap from Container. Make sure Filter is clear of dirt and debris. Refill Container with liquid, and replace Cap. Pump Arm to pressurize system and continue spraying. To attach Extension Arm (57), make 14. sure the end has the rubber sealing gasket in place. If not, use a gasket from the spare parts bag and insert into end of Extension Arm. Fasten Extension Arm to Spray Head 15. Nut (53) until tight. Adjust Extension Arm to desired length. When finished spraying, depressurize 16. system. Remove Cap and empty remaining liquid into secure container. Clean the Sprayer thoroughly with 17. agents recommended by the chemical manufacturer. Allow the unit to air-dry. Replace the Cap (23), and store the Sprayer in a clean, dry, safe location out of reach of children. Note: 18. If the Sprayer is not used for a long period of time or continuously operated over several days, add some Vaseline (not included) to Air Tube Sealing Washer (13). This will help reduce wear and ease and obstructions in the Sprayer. Maintenance And Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. Cleaning, Maintenance, and Lubrication BEFORE EACH USE,1. inspect general condition of Sprayer. Check for misalignment or binding of moving parts, damaged or loose parts, dirt or debris in Filter, and any other condition that may affect tool’s safe operation. Do not use damaged equipment. After Use,2. clean external surfaces with clean, moist cloth. CAUTION! Always depressurize 3. system by squeezing Lever (41) before performing any inspection, maintenance, or cleaning. Periodically, 4. lubricate all moving parts of Arm (11). To clean: 5. If using liquid chemicals, flush the interior and clean the exterior of the Sprayer and its Spray Gun Assembly thoroughly with cleaning agents recommended by the chemical manufacturer. Then, allow to air- dry. Do not use solvents. When storing: 6. Always completely empty Sprayer of liquid. Frost will damage Sprayer if unit contains liquid. Store Sprayer in an indoor area such as a garage or shed. CAUTION! Make sure to store the Sprayer and any chemicals in a safe, dry, clean location out of reach of children. Avoid storing the sprayer in direct sunlight (which can lead to possible UV degradation.) CAUTION! 7. All maintenance, service, and repairs not discussed in this manual should only be performed by a qualified service technician. PARTS LIST Part Description ...
Otros modelos de este manual:Armas - 65040 (528.67 kb)