Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
8. Store idle tools and equipment out of reach of children and other untrained people. Tools and equipment are dangerous in the hands of untrained users. 9. Maintain the Sprayer with care. Keep this product clean. A properly maintained tool is easier to control. Do not use damaged tools and equipment. Tag damaged tools and equipment “Do not use” until repaired. 10. Check for misalignment or binding of moving parts, loose or broken parts, and any other condition that may affect the Sprayer’s operation. If damaged, have the Sprayer serviced before using. Many accidents are caused by poorly maintained tools and equipment. SERVICE 11. Product service must be performed only by qualified service technician. Service or maintenance performed by unqualified personnel could result in a risk of injury. 12. When servicing the Sprayer, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of personal injury. SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Sprayer. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. Use the right product for the job. There are certain applications for which this product was designed. Do not use small tools, equipment, or attachments to do the work of larger industrial tools, equipment, or attachments. Do not use this product for a purpose for which it was not intended. 3. Industrial applications must follow OSHA requirements. 4. Store idle tools. When not in use, store the Sprayer in a clean, dry, safe location out of reach of children. 5. This Sprayer is intended to be used only with water, liquid fertilizers, liquid herbicides, and liquid pesticides. Never attempt to spray flammable, combustible, or corrosive liquids with the Sprayer. 6. Always follow all chemical label precautions and local EPA (Environmental Protection Agency) regulations when using liquid chemicals. Do not touch harmful chemicals. After use, clean the Sprayer thoroughly with agents recommended by the chemical manufacturer. 7. Never point the nozzle of the Spray Gun Assembly at yourself or other people. 8. A note on disposal of chemicals: Never attempt to burn unused fertilizers, herbicides, pesticides, or any other types of chemicals. Make sure to check with your local solid waste authorities for proper disposal procedures. 9. Always make sure children and animals do not have access to chemically treated areas. 10. Dry running will cause damage to the inner seals. Make sure the water or liquid chemical supply used for the Sprayer is not dirty or sandy. 11. Do not pull or carry the Sprayer by its Spray Gun Assembly. Use the Handle on the Sprayer to move the tool from one location to another. 12. The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces. 13. This product is designed for outdoor use only. 14. Keep the Cap and Spray Gun Assembly of the Sprayer connected to the tool while the system is pressurized. Prior to refilling or emptying the Tank, pull up on the Pressure Release Valve to completely depressurize the system. 15. Prior to starting the Sprayer in cold weather, check all of the parts of the tool to make sure ice has not formed. Do not store the Sprayer where the temperature will fall below 32° Fahrenheit. 16. Do not keep water or any liquid chemicals in the Sprayer after use. 17. Make sure to clean the Filter of the Sprayer before each use. 18. Never leave the Sprayer unattended. When finished using the Sprayer, empty the unit. Thoroughly clean the unit and store it in a clean, dry, safe location out of reach of children. 19. ...
Otros modelos de este manual:Armas - ONE STOP GARDENS 95690 (167.09 kb)
Armas - ONE STOP GARDENS 95692 (167.09 kb)
Armas - ONE STOP GARDENS 95692 (167.09 kb)