Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
Notes on these Operating Please read these operating instructions carefully and observe the notes given. Use these operating instructions to familiarise yourself with the Water Timer, the unit’s features and proper use as well as with the notes on safety. A A For safety reasons, children and young people under 16 as well as anyone who is not familiar with these operating may not use the Water Timer. Keep these operating instructions in a safe place. 2. Proper Use The GARDENA Water Timer Electronic T 14 e is suitable and determinated for private use in domestic and hobby gardens, exclusively for outdoor use, to control sprinklers and watering systems. A A The Water Timer must not be used for industrial purposes or in conjunction with chemicals, foodstuffs, easily flammable and explosive materials. Compliance with the operating instructions provided by the manufacturer is a prerequisite to ensure proper use of the GARDENA Water Timer Electronic. The operating instructions also contain operating, servicing and maintenance conditions. 3. Technical Data Operating pressure: 1- 12 bar Flow medium: clean fresh water Max. water temperature: 40 ° C Watering cycles: 14 Battery: 1 . 9 V alkali-manganese (alkaline) type IEC 6LR61 Service life of the battery: approx. 1 year 4. How the Water Timer Electronic Works This GARDENA Water Timer Electronic T 14 e allows you to set different watering cycles for different watering times independent are using a sprinkler, a sprinkler system installation head watering system to water your garden. Your Water Timer Electronic will water your garden completely automatically according to the program you choose. You can set the timer to water your garden early in the morning or late at night when water evaporates the least, or while you are on holiday. 5. Operating Parts 1 Control unit Accompanying accessories 2 Display 8 G . adaptor for sleeve nut 3 Battery compartment 9 GARDENA threaded tap 4 Connection plug for control unit connector 5 Release button for control unit 6 Connection for Soil Moisture Sensor / Rain Sensor Option 7 Sleeve nut 0 Anti-theft protection 6. Preparation for Use Before you use your Water Timer Electronic you must: 1. Insert the battery 2. Connect the Water Timer Electronic to the tap 3. Set the watering program 6.1 Inserting the Battery ( Fig. A) 1. Remove the control unit 1 from the housing of the Water Timer by pressing the release button 5 (see Fig. B/ C). 2. Insert the battery (only use a 9 V alkaline battery) in the battery compartment ( Fig. A). Note: When inserting the battery pay attention to the + / – markings. 3. Reattach the control unit to the housing. 6.2 Connecting the Water Timer to the Tap ( Fig. C) The Water Timer is fitted with a sleeve nut for taps with a 33.3 mm (G1) thread. Adaptor for G 3/ 4 thread (26.5 mm) The adaptor supplied the Water Timer to be connected a G 3/ 4 thread (26.5 mm). If you are using the adaptor, screw the adaptor onto the tap before screwing the Water Timer onto the adaptor. Warning! Attach and screw on manually. Do not use pliers! 6.3 Function Keys and Display ( Fig. C) Note: The Water Timer control unit 1 can be removed ( Fig. B). This allows you to set the watering program somewhere other than where the Water Timer is to be used. Menu-O.K. . Changes to the next stage of the program. Simultaneously accepts and confirms the data you have entered using the man. key. On/ Off-man. . Used to change the individual data (e.g. counting hours, minutes, ...) . To switch a connected watering system on and off manually. LCD Display Note: . In the entry mode the corresponding display flashes. . At high temperatures (over 60 ° C at the display) the LCD may extinguish. This has no effect on the program sequence. Once the LCD display cools down, the display will appear again. On Status display – The connected watering system is active. Off Status display – The connected watering system is inactive. Time (current time) . In the programming mode: Hours – Hours of the current time Minutes – Minutes of the current time Start . Starting time; when the watering system becomes active. Hours – Hour when devices become active Minutes – Minutes when devices become active Cycle Displays selected program. 6.4 Programming Entering the Current Data 1. Press the O.K. key . the hours ( Time) start flashing. 2. You can enter the time using man. key, e.g. 9: 00. 3. Use the O.K. key to confirm the hour you have entered and to allow you to enter the minutes. 4. Select the minutes using the man. key, e.g. 23. 5. Confirm your entry by pressing the O.K. key and switch to the starting time. Entering the Starting Time 1. Use the man. key to enter the hours of the starting time, e.g. 7. Then press the O.K. key to confirm your entry and to enter the minutes. 2. Once again, use the man. key to set the minutes of the starting time, e.g. 30. Confirm your entry by pressing the O.K. key. You can now choose your program. Active Program 1. Choose a program listed in t...