Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
1 Projection clock with radio, 1 Operating manual The batteries and a 3V-mains adaptor (accessories), required for operation, are not included in the supply. Operating Elements q Projection lens w Telescopic antenna e Button Snooze r Projection, Display illumination t Display y Frequency scale u Button Alarm i Button Hour o Button Time a Button Min (Minute) s Loudspeakers d Projection focus f Tuning wheel g Volume controller VOLUME / BUZZ h External 3V Direct current connection for 4.0 mm x 1.7 mm barrel connector j Battery Compartment k Switch-Projection ON/OFF l Switch - Alarm ON/OFF ; Waveband selector FM/AM 2) Stand-up support (only Model KH 2202) - 6 IB_KH2201_02_AR909_UK_4.qxd 12.11.2007 13:10 Uhr Seite 7 Technical data Power rating: 3 V Rated current : 300 mA Frequency range : FM (VHF) 87.5 - 108 MHz AM (MW) 530 - 1600 kHz Dimensions: KH 2201 14.2 cm x 13.1 cm x 3.8 cm KH 2202 17 cm x 8.8 cm x 4.2 cm Weight : KH 2201 and KH 2202: ca. 245 gr. Operating temperature : 5°C - 40°C at <85% rel. humidity Batteries: (Batteries not supplied) • Model KH 2201: 1.5 V Type Mignon/AA • Model KH 2202: 1.5 V Type Micro/AAA • 2 x 1.5 V for radio operation, display illumination and projection • 1 x 1.5 V for the LCD clock (the compartment is described in “CLOCK USE“) Mains adapter: (Item not supplied) Rated voltage: DC 3V (+/- 5%) Rated current : min. 300 mA Barrel connector: 4.0 mm x 1.7 mm When using a 3 V mains adaptor, a battery must be inserted into the compartment “CLOCK USE”. Otherwise, the clock will not function. - 7 IB_KH2201_02_AR909_UK_4.qxd 12.11.2007 13:10 Uhr Seite 8 Placement • Place the projection clock onto a level surface. • Position the projection clock such that the projection lens q is directed onto an empty surface. Only Model KH 2202: • Fold out the stand-up support 2). Operation Connect the external mains adaptor This appliance can be operated with an external mains adaptor. Please use only mains adaptors that meet these specifications: Rated voltage: Rated current : Barrel connector: DC 3V (+/- 5%) min. 300 mA 4.0 mm x 1.7 mm Attention: Make certain that the polarity is correct – both for the batteries as well as for the mains adaptor. Take note of the markings on the 3V direct current connection h . False polarity will damage the appliance. - 8 IB_KH2201_02_AR909_UK_4.qxd 12.11.2007 13:10 Uhr Seite 9 Radio operation 1. To switch on, turn the volume controller VOLUME / BUZZ g, until an audible »Click« is heard. 2. Using the volume controller VOLUME / BUZZ g now set the desired volume. 3. Set the waveband selector switch ; to the desired wavelength range (FM/AM). 4. Adjust the tuning wheel fto select the desired radio station. The frequencies can be read off from the frequency scale y. 5. To switch off, turn the volume controller VOLUME / BUZZ g until an audible »Click« is heard (KH 2201.Turn the volume controller upwards, KH 2202: Turn the volume controller to the rear). Setting up the telescope aerial On Model KH 2201: • Extend the telescope aerial w completely. The telescope aerial w on Model KH 2201 is not rotatable. If you try to turn the telescope aerial w, the aerial mounting will be damaged. On Model KH 2202: • Remove the telescope aerial w from its retainer and set it up. • Extend the telescope aerial w completely. To improve reception in the FM frequency range, slowly turn the end of the telescope aerial w in various directions. As soon as you have found a position with good reception from your desired radio station, leave the telescope aerial w in this position. For the reception of AM transmitters, an aerial is built into the appliance. For improved reception, alter the position of the appliance in radio mode. - 9 IB_KH2201_02_AR909_UK_4.qxd 12.11.2007 13:10 Uhr Seite 10 Setting the time Whilst holding the button T...
Otros modelos de este manual:Registradores de tiempo - KH 2001 (624.12 kb)
Registradores de tiempo - KH 2001 (624.12 kb)
Registradores de tiempo - KH 2202 (624.12 kb)