Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Be sure to remove the sticker before using the clock. •Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. Current time (Hour, minutes) Current temperature Date (month – day) PM indicator Alarm indicator Alarm time Snooze on indicator Alarm on indicator Alarm Off HR (MONTH) or MIN (DATE) button depressed Snooze Alarm On GENERAL GUIDE 11111SNOOZE/LIGHT button •Press this button to illuminate the display for about three seconds. •Pressing this button while the alarm is sounding stops the alarm. 2222212 • 24 HR (YEAR) button •Press this button to toggle between 12-hour and 24-hour timekeeping. •Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting. 33333MIN (DATE) button •Pressing this button while “TM” is selected by the Mode switch 5 advances the minute setting. •Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting. PM indicator Hour Minutes Press to toggle between 12-hour and 24-hour timekeeping. Press to advance the minute setting. Press to advance the hour setting. Year Month Day Press to advance the year setting. Press to advance the day setting. Press to advance the month setting. 44444HR (MONTH) button •Pressing this button while “TM” is selected by the Mode switch 5 advances the hour setting. •Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting. 55555Mode switch NORMAL: For normal use AL: For adjusting the alarm setting TM: For adjusting the time setting CALENDAR: For adjusting the date setting 66666Alarm Mode selector SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off 77777°C/°F button Press this button to toggle the temperature units between Celsius and Fahrenheit. 88888Battery SETTING THE CLOCK 1. Slide the Mode switch 5 to “TM”. This causes the current time to flash on the display. 2. Use the 12 • 24 HR (YEAR) button 2, MIN (DATE) button 3, and HR (MONTH) button 4to set the time. Holding down the MIN (DATE) button 3 or HR (MONTH) button 4changes the corresponding setting at high speed. •Make sure you set the correct am/pm time if you are using 12- hour timekeeping. The PM indicator indicates PM times, while nothing is indicated for AM times. •The seconds count reverts to 00 automatically whenever you finish adjusting the minute setting. 3. Slide the Mode switch 5 to “CALENDAR”. This causes the current date to flash on the display. 4. Use the 12 • 24 HR (YEAR) button 2, MIN (DATE) button 3, and HR (MONTH) button 4to set the date. Holding down any button advances the corresponding setting at high speed. •You can set the year in the range of 1990 to 2030. 5. Slide the Mode switch 5 to “NORMAL”. This will cause the figures on the display to stop flashing. 1 Operation Guide DQ-584/584B USING THEALARM The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of the alarm operation as well. The alarm tone alternates between two levels. You can also use the Alarm Mode selector 6 to select the snooze alarm feature. Setting the Alarm Time 1. Slide the Mode switch 5 to “AL”. This causes the alarm time setting to flash on the display. 2. Use the 12 • 24HR (YEAR) button 2, MIN (DATE) button 3, and HR (MONTH) button 4to set the alarm time. Holding down the MIN (DATE) button 3or HR (MONTH) button 4changes the corresponding setting at high speed. •Make sure you set the correct am/pm time if you are using 12- hour timekeeping. The PM indicator indicates PM times, while nothing is indicated for AM times. 3. Slide the Mode switch 5 to “NORMAL”. This will cause the figures on the display to stop flashing. 4. Turning the Alarm On and Off Use the Alarm Mode selector 6 on the t...
Otros modelos de este manual:Registradores de tiempo - DQ-584 (533.88 kb)