Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
.......................... 9 Cable Wiring Diagrams 10 RS-232 (Computer to PC100) ..................................................................................................... .......... 10 RS-485 Multi-Drop.............................................................................................................. .................. 11 Junction Box to Terminal ....................................................................................................... ............... 12 Troubleshooting 13 PC100 .......................................................................................................................... .......................... 13 PC100 Terminal User’s Guide CHAPTER 1 Welcome Reliability, functionality and ease of use are trademarks of the PayClock terminal. With the PC100 terminal, employees use their plastic ID badges to punch in and out – it’s that simple. Using Lathem software and your computer, the PayClock terminal is the perfect solution for businesses that want to track employee time and automate payroll. The PC100 terminal package includes the following: • PC100 Terminal • AC Wall Adapter – 115 VAC 60 HZ • Mounting Bracket • 3 Mounting Screws and Anchors 2 Keys 1 PC100 Terminal User’s Guide CHAPTER 2 Mounting the PC100 Check your package contents to make sure everything is accounted for before starting. Decide where to mount your clock. Keep in mind that the AC adapter plugs into a wall outlet. To mount the clock, you need the following items: Drill with a 5/16” bit Hammer Phillips head screwdriver Pencil 1. Screw the mounting bracket to the wall » Hold the bracket against the wall so the top (arrow pointing Up) is 54 inches from the floor » Mark the 3 holes with a pencil » Remove the bracket and drill a 5/16-inch hole at each mark » Insert an anchor into each hole, tapping with a hammer until it is flush against the wall » Align the mounting bracket back on the » Insert each screw through securely 2 PC100 Terminal User’s Guide 2. Place the clock onto the mounting bracket » Turn your key counter-clockwise in the lock at the clock’s right-middle section to unlock » Align the keyholes on the back of the clock with the studs on the mounting bracket » Slide the clock down onto the bracket » Turn the key clockwise to lock the clock onto the bracket » Remove the key 3 PC100 Terminal User’s Guide CHAPTER 3 Connecting to the Computer After mounting your PayClock on the wall, you need to connect it to your computer. You can connect the PayClock terminal to the computer using an RS-232 cable or RS-485 cable. Choose the setup that best suits your needs. Connecting the PayClock via RS-232 1. Turn the PayClock so its back faces you 2. Plug the power cord (AC adapter) into the PayClock, keeping the cord slack 3. Plug the other end of the power cord into a wall outlet 4. Connect the jack end of the serial cable to the PC100 5. Connect the other end of the serial cable to an open COM port on your computer. All serial po...
Otros modelos de este manual:Registradores de tiempo - PC100 (105.29 kb)
Registradores de tiempo - PC2000 (105.29 kb)
Registradores de tiempo - PC2500 (105.29 kb)
Registradores de tiempo - PC3500 (105.29 kb)