Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
- 36 - 7 7 Delete User Data 1) Press [MENU], the following appears: Menu Ў >User Manage Options PenDrive Mng 2) Select “User Manage”, press [OK], the following appears: User Manage Ў Enroll User Enroll Admin >Delete 3) Select “Delete”, press [OK], input the User ID, press [OK] to confirm, follow the prompts to delete user. Delete User ID 00008 ESC OK Note: You cannot delete a user with multiple enrolled fingerprints without deleting each fingerprint first. If the user has a password you will also need to delete it before you can remove the user from the terminal. - 37 - 8 8 Options Press [MENU] and verify your identity. The following appears: Menu User Manage >Options PenDrive Mng Select “Options”, press [OK], the following appears: Options >System Opt Power Mng Comm Opt ---------------------------- Log Opt Auto Test The following topics are reviewed in this section: System Options, Power Management, Communication Options, Log Options and Auto Test. - 38 - System Options Select “System Opt”, press [OK], the following appears: System Opt Ў >Date Time Time Fmt 12H Language ENG ---------------------------- Fmt MM/DD/YY Adv Option The System Options are: Date & Time, Time Format, Language, Display Format and Advanced Options. Set Date & Time Select “Date Time”, press [OK] the following appears: YYYY-MM-DD 24H 2008-01-02 08:24:35 ESC OK To change the date & time, input the correct date, press [^/Ў], enter the time and press [OK]. Note: The time and date will update automatically when the terminal is connected to the network. - 39 - Changing the Time Format Select “Time Fmt”, press [OK], press [^/Ў] to change between 12 Hour and 24 Hour Format. Changing the Language Select “Language”, press [OK], press [^/Ў] to select the language (the default language is English), press [OK]. System Opt Ў Date Time Time Fmt 12H >Language ENG Press [ESC] to exit system options. The system will prompt you to save the setup, press [OK]. Restart the terminal for the language change to take effect. Opc. Sistema Ў Fecha y Hora Time Fmt 12H >Idioma ESP System Opt Ў Date Time Time Fmt 12H >Language ENG English Spanish - 40 - Changing the Date Format Select “Fmt YY-MM-DD”, press [OK], press [^/Ў] to select the date and time format, press [OK]. System Opt Ў Time Fmt 12H Language ENG >Fmt YY-MM-DD There are ten formats: YY-MM-DD, YY/MM/DD, YY.MM.DD, MM-DD-YY, MM/DD/YY, MM.DD.YY, DD-MM-YY, DD/MM/YY, DD.MM.YY, YYYYMMDD. E.g.: YY/MM/DD format (left) change to YY-MM-DD format (right) Welcome 17:37 08/06/18 WED Welcome 17:37 08-06-18 WED - 41 - Advanced Options Select “Adv Option”, press [OK], the following appears: Adv Option Ў >Reset Opts. Del AttLogs Clear All Data ---------------------------- Clr Admin Pri Show Score N Match Thr 35 Mst Input ID N 1:1 Thr 15 Voice Y Upd Firmware Work Code NO Adj VOL(%) 67 Press [^/Ў] to scroll up or down to select the option. • Reset Opts.: Restore all setup values to factory defaults. • Delete AttLogs: Delete all transaction logs. • Clear All Data: Delete all users and logs. (Note: You will lose all information stored on the terminal.) • Clr Admin Pri: Change all privilege levels to User. • Show Score: Show the degree to which a fingerprint reading matches the stored template. 0 is the lowest score (no match) and 50 is the highest score (perfect match). - 42 - • Match Thr: Set the fingerprint match threshold level. The threshold value can be set 0 – 75 (default is 35). See Table 1-1. • Mst Input ID: Turns 1:1 (one to one) fingerprint verification on or off. • 1:1 Thr: The minimum fingerprint read correlation needed to achieve a positive match for 1:1 verification. • Voice: Set the voice prompts on or off. • Upd Firmware: The user cannot update the firmware unless this feature has been enabled by an authorized dealer. • Work Code: Not available at this time. • Adj VOL(%): Adjust the volume level (0-99); “0” turns off the speaker. - 43 - Power Manager Select “Power Mng”, press [OK], the following appears: Power Mng Ў >Shutdown N PowerOn N Sleep N ---------------------------- Idle SLP Idle Min 0 Bell Delay 10 Scheduled Bell Lock Power N • Shutdown: Set a time the terminal will automatically turn off. The terminal can be turned on again with the power button. Select Shutdown, press [OK], the following appears: Shutdown Set Sch. Fun? ESC OK Press [OK] and enter the time the unit will shut off. After setting the shutdown time, press [ESC] and then [OK] to save the settings. • PowerOn: Set a time the terminal will automatically turn on. - 44 - • Sleep: Set a time the terminal will go into sleep mode. Pressing any button will awaken the terminal. • Idle: Select “SLP” or “OFF” for the Idle mode. “SLP” – Sleep mode allows the terminal to be awakened by pressing any key. “OFF” - Turns the unit off and the power button must be pressed to turn the unit on. • Idle Min: Set how many minutes of no use before the terminal goes into the selected “Idle” mode. Setting “Idle Min” to “0” turns off this feature. • Bell Delay: Set...
Otros modelos de este manual:Registradores de tiempo - timeQplus V3 (420.43 kb)