Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
....................................... Many thanks for purchasing SEIKO Bell Timer. Before putting your SEIKO Bell Timer system to use, please be sure to carefully read through this manual as it has been designed to provide you with information for correct handling, use and maintenance necessary for safe, long-lasting and trouble-free operation. Keep this manual at hand for ready reference. -.../ CAUTIONS- (1) ............................... (2) .............................. (3) ............................................ ................. (4) ............................................ .........-.................................. .......................... (1) This manual is the property of SEIKO and may not without the express written consent of SEIKO be copied or reproduced in any form, in whole or in part, or used for any purpose other than that for which it is supplied. (2) This manual may be subject to change without notice. (3) This manual has been prepared to give complete information necessary for the operation, use, handling and maintenance of MODEL QBT-30. For the purpose of our constant technical manual improvement program, your questions, advice, suggestions and comments on the descriptions, illustrations, procedures or any matter concerning this manual are highly appreciated. (4) SEIKO shall have no liability to the user in respect of any loss or damages, whether consequential or incidental, sustained by the user if such loss or damages are: 1) due to abuse, misuse, failure to observe instructions given in the manual furnished by SEIKO and neglect of other reasonable care and servicing due to be done by the user irrespective of such instructions, and failure due to deliberate actions or gross negligence or accident; 2) caused by changes, modifications, or alterations made without prior written consent of SEIKO or by any person other than authorized by SEIKO; or, 3) due to negligence on the part of the user of what should be done or should not be done as a good caretaker of Bell Timer Model QBT-30. -............/SYMBOLS AND THEIR MEANINGS. .................... The symbols and terms used in this manual are explained below. .. DANGER .............................. ................... DANGER is used to indicate the presence of an imminent hazard which is LIKELY to cause SEVERE personal injury, death, or substantial property damage if the instructions under this heading are ignored. ............................. .. ........... WARNINGWARNING is used to indicate such operational procedures, practices, or situations that may result in personal injury or loss of life if relevant instructions are not followed correctly. I-5974-4 ................. The following pictorial symbols indicate what must not be done. ...... General Prohibition .... Prohibition against disassembly/t ampering ........ Prohibition against exposure to water .... Prohibition against touch ......................... The following pictorial symbols indicate what must be done. ..................... General Connection of Extraction of instructions grounding conductor the power plug I-5974-4 . ./Table of Contents 1 1.............../ Safety Precautions 4 2.../ Overview 5 3....../ Features of QBT-30 5 4......../ Accessories and Spares 6 5......./ System Configuration 7 6........./ Nomenclature and Functions 8 7......./ Installation 7.1 ........./ Precautions 8 8......../ Installation and Wiring 10 8.1 ......./ Mounting position 10 8.2 ......../ Mounting hole sizes 10 8.3 ......../ Mounting on the wall 11 8.4 ../ Wiring 13 9...../ Operation 16 9.1 ...../ An outline of the control panel 16 9.2 ...../ Powering-up 17 9.2.1 ...../ Powering-up 17 9.2.2 ......../ SYSTEM RESET 17 9.2.3 ........./ Motion of analog clock hands 17 9.3 ........./ How to set the present time 18 9.4 ........../ How to set the program 19 9.4.1 ......./ Weekly program 19 9.4.2 ....../ Playing of melodies 20 9.4.3 ....../ Dry contact output signal control 22 9.4.4............./ Control of melody playing and dry 24contact output signal 9.4.5 ........./ How to copy a program 26 9.4.6 ......../ How to clear a program 27 9.4.7 ........./ How to clear all the selected programs 27 9.5 ........./ Changeover of dry contact signal output mode 28 9.6 ........../ Melody test 29 9.7 .........../ How to set the summer time 30 9.8 ...... (Japan Only) 31 9.8.1 ........ 31 9.8.2 .... 33 9.8.3 .... 34 9.8.4 .... 34 35 10..... (Japan Only) 10.1 ...... 35 10.2 .......... 35 10.3 ............ 35 10.4 .. 35 36 11...../ Backup against Commercial Power Failure 36 12........../ Troubles You Can Solve Yourself 38 13........./ Daily Servicing by the User 38 14......./ Warranty 39 15.../ Specifications 41 16........./ Programming Table I-5974-4 1................/ Safety Precautions .............................................. ..................... The following precautions must be strictly observed for the safety of yourself and your fellow workers and for the protection of property from loss ...