If the clock has poor signal reception or unstable signal marks, move the clock to another location. While the clock is receiving, press TIME SET once to go to the Time display mode. The clock continues receiving the atomic time. Press HOUR/WAVE to enter Signal Strength display. While the clock is receiving, if you set the time or an alarm, the clock stops receiving immediately. When receiving cannot be completed at 7 minutes after power up, the clock returns to the time display with clock DEMCJ

RadioShack Corporation. All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. i—(2) Countdown timer 1. Press to set ■ to 0:00:00. HS!j 2. Press to enter time. 3. Start/stop countdown. —(3) Stopwatch uuu imi ¿8 06609 OOOOO 1. Press to set to 0:00:00. T 2. Start/stop the stopwatch. Printed 02A09 in China 63-248

Your RadioShack Atomic Projection Clock combines a simple design with advanced technology. You can set the clock to project the current time on a wall or the ceiling for easy nighttime viewing. You can also set the clock to automatically set the time and date, using a 60 kHz longwave radio signal from radio station WWVB. The clock checks the radio signal several times each day and automatically updates the time and date, providing the most accurate time possible. Or, if you are unable to receive

Thank you for purchasing the RadioShack Jumbo-Digit Atomic Wall Clock with Wireless In/Out Thermometer. Your clock is a multifunctional radio frequency (RF) controlled clock designed to automatically synchronize the current time and date when brought within range of the radio signal from the U.S. Atomic clock. After you install the batteries, the clock automatically searches for a radio signal. $#66'4;"+056#..#6+10 You need two AA alkaline batteries for the clock and two AA alkaline batteries fo

Please read this user’s guide before installing, setting up, and using your new clock. Quick Start Features • Sets automatically and stays set • Synchronizes with the U.S. atomic clock in Fort Collins, Colorado • Automatically updates for Daylight Savings Time • Mounts on a wall, or sits on a flat surface • Displays time in 12 or 24 hour format, date, day of the week, and temperature in Fahrenheit or Celsius 2 Install Batteries Your clock requires 2 AA batteries (not supplied) for power. 1. Flip

2 AAA batteries RESET 2 AA batteries ©2009. RadioShack Corporation. All rights reserved. Radio Shack and RadioShack.com are trademarks used by Radio Shack Corporation. |-(2) Set up the thermometer SEARCH — Search signal from remote sensor. -® Use the thermometer - CHANNEL Select a channel. MEMORY Toggle between current, max. or min. temperatures. Printed 03A09 in China 63-1088

Please read this user’s guide before installing, setting up and using your new clock. PM indicator ALARM ALARM indicator SNOOZE DIMMER HI/LO BUZZER HI/LO ALARM ON/OFF WARNING........................................................ or shock hazard, do not expose this product to rain or moisture CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK.NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The light

Wall Mount Holder — Use to mount the thermometer on a wall. Removeable Stand — Use to set thermometer on a table or other flat surface. Channel 1/2/3 — Slide to Channel 1, 2, or 3. Set to a different channel than the other remote sensors you are using. o yyyy— Appears if the batteries are weak. POOL SPA WIRELESS THERMOMETER Liquid Crystal Display — The current temperature and selected channel appear. Temperature Sensor Probe — Place it in water to test the temperature. °C / °F — Select Centigrad

Ignition L.P. All rights reserved. (Î) Install one AAA battery (D Set Clock and Alarm Enter clock/alarm setting mode. Enter alarm mode. Adjust digits. Printed 07A09 in China 63-267

PressthetabtoFeatures • RadiocontrolledclockreceivessignalfromWWVB60kHzandadjuststimeanddate2 Install Batteries 1. Pressthetabto 6:00 a.m. It stops the update once the time is updated for the day. n Notes: • The radio signal search takes approximately 10 minutes after batteries are installed or when RESET is pressed. If you want to set the time and date manually, press )/WAVE to stop signal search at any time. • The clock automatically adjusts the daylight saving time (DST) upon receipt of a sig