Votos - 5, Puntuación media: 3.8
(
)
)
|
Resumen del manual
1.1 Package Contents Unpack your Airlink101 TV box and make sure that all the items are intact. The following items should be included in your package: • Airlink101 TV box • Audio Cable • Composite to S-Video Converter Cable • Power Adapter • Quick Installation Guide • Installation CD • Remote Control [requires two AAA batteries (not included)] 1.2 Minimum System Requirements • Intel Pentium 4 2.0GHz or above CPU • 256 MB RAM • 200 MB available hard disk space • One available USB port (USB 2.0 recommended) • Microsoft Windows 2000/XP • VGA with 800x600 16-bit resolution (DirectX 9 supported) • AC 97 compatible sound card • Speakers for audio output • CD-ROM drive Section 2 Section 2 Installing Hardware Before you plug the Airlink101 video capture adapter into your computer’s USB 2.0 port, please check your USB 2.0 device driver first. If your USB 2.0 host controller driver is not the latest version or provided by Microsoft, we strongly recommend you use our “USB 2.0 Updater” utility from the autorun page on the CD. It will help you to upgrade your USB 2.0 driver to the latest version released by Microsoft in order to avoid some compatibility issues. Note: Be sure to follow the steps carefully and plug in the USB 2.0 connector last. Step 1 Connect the coaxial cable for the TV antenna/cable to the TV port of the TVbox. Step 2 Connect the S-Video cable from you video source to the S-Video port of theTV box. If you don’t have an S-Video cable, use the provided Composite to S-Videoconverter cable. Step 3 Connect the audio cable from your audio source to the AUD-IN port of the TV box. Step 4 Connect one end of the provided Audio Cable to the AUD-OUT port of the TV box and connect the other end to the Line In port of your sound card. Step 5 Connect one end of the power adapter to the Power Adapter port of the TV box and connect the other end to an electrical outlet. Step 6 Connect the USB 2.0 connector from the TV box to an USB 2.0 port on yourcomputer. Section 3 Section 3 Installing TV Box Driver Before installing the driver, it is highly recommended that all background applicationssuch as antivirus software and system monitoring programs be disabled first. Step 1 When you plug in the USB 2.0 connector to the USB 2.0 port of yourcomputer, the Found New Hardware Wizard will appear. Click Cancel to quit thewizard and insert the provided Installation CD. Step 2 The setup menu will automatically appear. Select Driver Install to start the driver installation. Note: If the setup menu does not appear automatically, go to Start, Run, and typeD:\autorun.exe(where D is the letter of your CD-ROM drive) and click OK. Step 3 Click Next to install the driver for the Remote Control. Step 4 Click Next to install the driver for the TV box. Step 5 Click Next to launch the TVSetup utility. Step 6 Click Country to configure the setting. Step 7 For U.S.A., select one of the following Step 8 Unplug the USB 2.0 connector from your computer, re-plug the connector, and click OK. Step 9 Select Yes, I want to restart my computer now and click Finish to restart your computer. Note: If you want to re-configure the TV system, you can run the “TVSetup” utility to change the setting. Click Start, Programs, Airlink101, ATVUSB05 Utilities, TVSetup to execute the program. Section 4 Installing PVR PLUS PVR PLUS is a set of utilities that allow you to watch TV on your computer, edit video clips, burn DVDs, and more. Before installation, it is highly recommended that all background programs such as antivirus software and system monitoring programs be disabled first. Step 1 Insert the provided Installation CD-ROM. Step 2 Select PVR PLUS at the setup menu. If the setup menu does not appear automatically, go to Start, Run, and type D:\autorun.exe(where D is the letter of your CD-ROM drive) and click OK. Step 3 Click Next to begin installation. Step 4 Click Next to accept the default Destination Location or click Browse to choose a new location. Step 5 Click Next to accept the default Program Folder. Step 6 Click Finish to complete the installation. Section 5 Section 5 Using PVR PLUS Double-click the PVR Plus icon on your desktop to run PVR PLUS. After you started PVR PLUS, you can select the application you want to use. Click on each icon to start the application. TVR: TVR turns your PC into a full-featured video recorder. MPEG Encoder: MPEG Encoder converts DV/AVI files into MPEG/ DVD format. Video Editor: Video Editor allows you to edit MPEG/DVD videos. DVD Maker: DVD Maker lets you create VCD, SVCD, and DVD that can be played on a PC or DVD player. Section 6 Section 6 Configuring TVR TVR is a powerful and easy-to-use TV application that provides feature-rich video/ audio entertainment. TVR allows you to watch and record TV or video on your computer and playback the recordings as well. Click the TVR icon on the PVR PLUS console to start TVR. Note: The first time you start TVR, it will run the TV Frequency Table Setup Wizard. Step 1 For U.S.A., select ...