Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Press the AUDIO button to select audio mode. The audio button works to adjust the volume. 2. Press the same button again and again to alternate among all audio options: < > Volume > Bass > Treble > Balance > Fader > Loud > Sound effect > 3. Stop on the attribute you want to control. English Option Knob direction Description Volume Left Reduces volume. Right Increases volume. Bass and treble Left Reduces bass or treble. Right Boosts bass or treble. Balance Left to right Adjusts the volume proportion from the left to the right. Fader Left to right Adjusts the volume proportion from the front to the rear. Loud Left Turns off Loud. Right Turns on Loud, giving an extra volume boost. When on, turning the volume knob to the right increases the volume more quickly than it would otherwise. Sound effect control Left to right Selects one of the following sound effects, which you can set based on the type of music you listen to: NORMAL > POP > FLAT > CLASSIC > JAZZ > ROCK > < > NOTE After five seconds of inactivity, the player exits audio setup mode. Muting the sound To mute sound, briefly press Power/mute ( ). To enable sound, briefly press Power/ mute again. Turning the player off When you’re finished, either press the power button on the remote or press and hold the power button on the player for two seconds. VB475 11 VB475OwnersManual.indd 11 1/27/2007 9:34:26 PM English The player briefly displays, “Bye Bye!” and enters its “standby” state. The player never turns off completely. If the clock display is enabled (the default), the player displays the current time prefaced by “AM” or “PM.” Setting the time In standby, you can set the time on the clock. 1. If the player is on, press the power button ( ) to turn it off (go into standby mode). 2. Press and hold the D button on the player. The system displays the current time setting. 3. To switch between setting the hours and minutes, press the button again. 3. Press the next button ( )to increase the hours or minutes. 4. Press the previous button ( ) to decrease the hours or minutes. NOTE After five seconds of inactivity, the player exits time setup mode. Protecting the player from theft To discourage theft, detach the front panel, store it in the protective case provided, and take it with you. Removing the front panel 1. Press the open button ( ) in the upper left corner of the player to open the front panel. Open button Left side of the player CAUTION Do not grip the front panel buttons or use force to remove and install the front panel. 2. Holding the right side of the front panel, push the panel to the left to release the right pivot hinge. 12 VB475 VB475OwnersManual.indd 12 1/27/2007 9:34:27 PM VB475 13 English Right pivot hinge Direction to disconnect the front panel 3. Pull the panel out to release and remove it from the left pivot hinge. The left pivot hinge is in the lower left Corner of the chassis Direction to remove the front panel CAUTION Do not subject the front panel to excessive shocks. Do not expose the front panel to direct sunlight or high temperatures. Replacing the front panel 1. Line up the front panel with the opening on the player. 2. Pressing on both left and right edges, snap the panel into place. Care and maintenance Cleaning the player • Use a clean, soft, dry cloth to gently wipe dust and dirt from the player. • Do not use benzene, thinner, vehicle cleaner, or other cleaners. These substances may damage the system or cause the paint to peel. • The surface of the LCD screen can be easily scratched. Do not rub it with anything abrasive. Servicing the player In the event that trouble arises, never open the player case, disassemble it or attempt to repair it yourself. The internal parts are not serviceable by the user. Opening any components will void the warranty. All warranty service should be performed by an authorized Clarion service center. VB475OwnersManual.indd 13 1/27/2007 9:34:28 PM English CAUTION! Changes or modifications to this product not approved by the manufacturer will void the warranty and will violate FCC approval. Cleaning the remote control Use only a clean, soft, damp cloth to clean the remote control. Do not use lighter fluid, methanol alcohol or other solvents. Cleaning discs Before playing a disc, wipe it outwards from the center with a clean, soft cloth. Changing the battery in the remote control The remote control uses one CR2025 (3V) lithium battery. 1. Slide the tray out on the back of the remote control. Replacing the remote control battery 2. Remove the used battery. 3. Insert the charged battery with the plus (+) and minus (-) poles pointing in the direction shown. Battery precautions • Keep batteries out of the reach of children. If swallowed, immediately consult a doctor. • If you won’t be using the remote control for a month or longer, remove the battery. • Do not recharge A battery. • Do not attempt to disassemble a battery. • Do not handle batteries with metallic tools. • Do not store batteries with metallic...
Otros modelos de este manual:El receptor y el amplificador - VB475 (1.39 mb)
El receptor y el amplificador - VB475 (1.39 mb)