Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Be sure that the source and the power amplifier are turned on or will be on at the Timer turn-on time. If your components have trigger inputs, you can set a processor trigger to turn them on (see section 3.11). On-Volume: Sets the volume that will play when a Timer turns the power on. The volume increases slowly when a Timer turns the power on. 22 3. SETUP continued Example 1: Select a source for the ZONE2 Timer: • Enter the setup menu. Go to SET TIME/TIMERS and press SELECT. • Press the ▼ button until you reach SET ZONE2 TIMERS. • Press SELECT. The SET ZONE2 TIMERS submenu will appear. • Press the ▼ button until you reach SOURCE. • Use the i ► buttons to change to desired source. • Press BACK to leave this submenu and return to the SET TIME/TIMERS menu. To have the Timer turn on to a Preset Station, do the following from the SOURCE menu line: (setting Preset Stations is explained in section 4.4.1) • Use the i ► buttons to change to "Last Stn". • Press SELECT to highlight "Last Stn". • Use the buttons to select an FM^AM Preset. These scroll from AM 1-1 to AM 1-6 then from FM1-1 to FM3-6 and back to "Last Stn". • Press BACK once you have selected a preset. The Timer submenu setup procedure is the same for MAIN, ZONE2, and ZONE3. Example 2: Change ZONE2, TIMER2 to come on Weekdays at 7:30 AM. • Enter the setup menu. Go to SET TIME/TIMERS and press SELECT. • Press the ▼ button until you reach SET ZONE2TIMERS. • Press SELECT. The SET ZONE2 TIMERS submenu will appear. • Press the ▼ button to reach TIMER 2. • Use the i ► buttons to change to "Week". • Press the ▼ button until you reach WEEKDAY ON. • Press SELECT. The hour is now highlighted. Use the Master Control Knob or the buttons to set the hour to "7" AM. (Continuing through "12" will advance the AM/PM settings.) • Press the ► button. "00" minutes will be highlighted. • Use the Master Control Knob or the buttons to set the minutes to "30". • Press BACK to leave this submenu and return to SET TIME/TIMERS menu. When scrolling between 11 PM and 12 AM settings, the display shows "--:--". Timers set in the "--:--" position will be skipped. For example, to set the Timer to only turn on, set the Off time to "--:--". To set the Timer to only turn off, set the On time to "--:--". 23 3. SETUP iSûliûUSÜ 3.3 SPEAKER CONFIGURATION The Speaker Configuration Setup allows you to enter information about your speakers so that sounds from source materials are not lost or distorted. 3. SPEAKER CONFIGURATION a. BASS MANAGEMENT-MOVIE b. BASS MANAGEMENT-MUSIC c. SURROUNDS: Dipole d. REARS: Dipole-7.1 e. UNITS: ft f. CENTER EQ: No g. TV SIZE: 30-42 in h. ROOM RESONANCE FILTER Skip items f. to h. if using Anthem Room Correction on all sources. Bass Management Configurations for Movies and Music: The processor memorizes two bass management configurations - if using both (Music configuration is optional), always use Movie for source material that contains LFE. The BASS MANAGEMENT-MUSIC menu asks whether or not you want to use the same settings as the Movie configuration - the default is "Yes". Setting up a configuration is described later in this section. Assigning a configuration to a source or enabling automatic activation according to presence/absence of LFE is explained in section 3.6. If your source components have bass management and time alignment, turn them off by setting all channels "large" and to the same distance in the source components. Surround and Rear Speaker Quantity and Type: Surround speakers fall in two radiation pattern categories: Direct and Dipole. No delay is necessary in channels using dipole speakers since most of the sound is delayed through room reflections. When Dipole is selected, distance is matched internally with the greatest one in the LISTENER POSITION menu. If you are using one rear speaker, set d. REARS to 6.1 and use the Rear-L output. If you are using no rear speakers, skip the d. REARS setting. It makes no difference what it's set to. Units: Feet (ft) or metres (m). This will be used for size and distance measurements. Center EQ: When a speaker sits directly above or below a vertical surface such as a TV screen, reflections can change frequency response making dialog less natural. With Anthem's unique CENTER EQ set to "Yes" the negative effects of vertical surfaces close to the front of the speaker can be cancelled. TV Size: This determines the CENTER EQ response curve. Select from 18 - 30" / 30 - 42" / 42 - 54" / 54 - 66" / 66 - 78". If UNITS is set to "m" the selections are 45 - 75 cm / 75 - 100 cm / 100 - 135 cm / 135 - 165 cm / 165 - 200 cm. Since room/TV/furniture acoustics vary as do center channel speakers and their positioning, play a few DVDs and use the setting that provides the clearest dialog even if it doesn't match the TV's size. Ü 3. SETUP iätiliBUSÜ Highlighting BASS MANAGEMENT-MOVIE then pressing SELECT displays this menu: 3a.BASS MANAGEMENT-MOVIE a. ADV SET...