Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
XDM-2221 “SKILZ” The Ultimate DJ Scratch Mixer! Main Features • 2 phono, 2 line, 2 auxiliaries, & 1 microphone input • Hamster Switch for changing cross fader postion • -30dB Rotary Kills for treble, bass & mids • Changeable transformer switch to up/down or left/right • Equipped with high quality Alps Feather Fader™ (FF-3) Crossfader(replaceable/made in Japan) • Fader Curve Switch - changes from a normal curve to a quick curve (for crabbing) • Separate gain control for each channel • Bass, mid & treble on microphone • High output to headphones • 2 separate headphone inputs • Soft-touch rubber knobs for better control • Super clean signal to noise ratio • 2 year limited warranty professional products designed for the working dj. © American DJ® AUDIO Los Angeles, CA 90058 USA Specifications subject to change without notice. XDM-2221 “SKILZ” User Instructions page 2 Index • Safety Instructions..................................................................................p.3 • Operating Determinations.......................................................................p.4 • Connections.............................................................................................p.4 • Functions (Front Panel)........................................................................p.5-6 • Inputs & Outsputs (Rear Panel)...........................................................p.6-7 • Replacing the Crossfader.......................................................................p.7 • Changing the Transformer Switch...........................................................p.7 • Technical Specifications.........................................................................p.7 • Warranty & Service..................................................................................p.8 Thank you for purchasing this American DJ® product. The XDM-2221 Is ready to be used, there Is no assembly required. Please read the following Instructions before installing or using your new unit. The XDM-2221 has a 2 year limited warranty! CAUTION! - Keep this device away from rain and moisture! Safety Instructions Always plug in the power last. Make sure that the Power switch is set to the OFF position before connecting other devices to the mixer. Keep away from heaters and other heating sources! If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature. Never put any liquids on the mixer or close to it. Should any liquid enter the device, disconnect from main power immediately. Have the device checked by a qualified service technician before operating again. Any damage caused by liquid entering the device is not subject to warranty! Never let the AC cord come in contact with other cables! Handle the AC cord and all AC connections with particular care. Make sure that the available voltage is not higher than stated on the AC voltage selector (25). Before the device is switched on, all fader and volume controls should be set to 0 or minimum position. Damages caused by manual modifications to the device or unauthorized operation by unqualified persons are not subject to warranty. There are no user serviceable parts inside the mixer. For maintenance and/or service, contact an authorized American DJ® dealer. XDM-2221 “SKILZ” User Instructions page 3 Operating Determinations When installing this mixer, please make sure that the device is not exposed to extreme heat, moisture or dust! There should not be any cables lying around. Doing so endangers you as well as others. Do not operate the mixer in extremely hot (more than 30.C / 100.F) or extremely cold (less than 5.C / 40.F) surroundings. Keep away from direct sunlight and heaters. Operate the mixer only after becoming familiar with its functions. Do not permit operation by persons not qualified for operating the mixer. Most damages are the result of unprofessional operation! Never use spray cleaners to clean the faders! Never use solvents or abrasive detergents to clean the mixer! It is recommended that you use a soft damp cloth. Please consider that unauthorized modifications on the device are forbidden due to safety reasons! Connections (Refer to dIagrams on pages 5 & 6) • Make sure that the power switch (1) is set to OFF. Before connecting other devices to the mixer, all units have to be switched off and the Master Control (13) set to min. • Make sure that the available voltage is not higher than stated on the voltage selector (25) before connecting to power. • In order to obtain the highest sound quality, only use high quality American DJ®, Ameri-Cable ™ cables for connecting devices. Make sure that the cables are properly fixed. • Connect your amplifier to the MASTER OUT jacks (21). Make sure that the channels are set properly. • For recording, connect your tape recorder or cassette...