Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
/7% □□□□ □□□ -, Dili_HHHH r loj W 1 Ico hf , i : ul Unit : mm Model No. WZ-DE45NH Input No. of Channels 2 ch Analog Type Electronic balance Rated Input +4 dB Maximum Input +24 dB or more Connector XLR-3-31 or equivalent, x2 Input Impedance 20 kfí In-Phase Reject Ratio 40 dB or more A/D Converter 24-bit A-Z type Digital Type AES/EBU format, for professional use Sampling Frequency 48 kHz±0.1% Connector XLR-3-31 or equivalent, 1 connector Output No. of Channels 2 ch Analog Type Electronic balance Rated Output +4 dB±1 dB Maximum Output +24 dB or more (at 10 kQ load) Output Impedance 150Q Connector XLR-3-32 or equivalent, 4 connectors Applicable Load Impedance 600Q or more D/A Converter 24-bit A-Ztype Digital Type AES/EBU format, for professional use Sampling Frequency 48 kHz Connector XLR-3-31 or equivalent, 1 connector (Recommended cable: Canare Electric DA206 or equivalent) General Frequency Response 20 to 20,000 Hz, +0.5, -1.0 dB Dynamic Range Analog input/output (typ, IHF-A) 115 dB (noise gate ON) 109 dB (noise gate OFF) THD 0.015% at +4 dB, 20 to 20,000 Hz, 30 kHz LPF (at 600Q load) Crosstalk -70 dB or less (10 kHz) User Memory 16 memories + 1 simple memory Externa Control Type RS-485 RAMSA-NET (See Note.) Connector D-SUB 9-pin, IN/OUT 1 each, setscrew M2.6 Recommended connectors Male: OMRON XM2A-0901 or equivalent Female: OMRON XM2D-0901 or equivalent Hood: OMRON XM2S-0911 or equivalent Pattern Control Type Make contact type, No. of control patterns: 12 + MUTE, BYPASS Anti-reverse diode provided Connector D-SUB 15-pin, setscrew M2.6 Recommended connectors Male: OMRON XM2A-1501 or equivalent Hood: OMRON XM2S-1511 or equivalent Power Supply AC220V-AC240V 50/60 Hz Power Consumption 16 W (as defined in the Electrical Appliances Control Act) Heat Flow 16 W (12 kcal) * The figure in parentheses is calorific value per hour. Stacking Conditions 2 units high maximum * If you are using 3 units or more, leave a space for a unit or more every 2 units. Dimensions 480 (W) x 44 (H) x 280 (D) mm (without rubber feet) Weight (approx.) 4.5 kg Note: "RAMSA-NET" is a protocol exclusive to Matsushita Communication Industrial Co., Ltd., used to send and receive data between the host computer and two or more audio control units connected to it with communication lines. Rear Panel "0 c CD I o A O o 33 m in in > s in >...